# Nrf24l01 + pa/lna

**URL:** <https://forum.fritzing.org/t/nrf24l01-pa-lna/19800>\
**Category:** parts help\
**Created:** [June 28, 2023, 8:50am UTC](https://forum.fritzing.org/t/nrf24l01-pa-lna/19800 "2023-06-28T08:50:19Z")\
**Posts on this page:** 1\
**Showing post:** 5

<div class="post-metadata">

**Author:** ![vanepp](https://forum.fritzing.org/user_avatar/forum.fritzing.org/vanepp/32/4426_2.png) [@vanepp](https://forum.fritzing.org/u/vanepp)\
**Post date:** [May 2, 2025, 2:28am UTC](https://forum.fritzing.org/t/nrf24l01-pa-lna/19800/5 "2025-05-02T02:28:46Z")

</div>

You are missing a connector definition in schematic and layerIds (which will cause the part to not export as an image.)

 ![capture](https://forum.fritzing.org/uploads/default/original/3X/8/f/8f78613840dd4dcf5095c48f6e1ee3ebb32900b7.jpeg)

FritzingCheckPartw.py reports the following errors:

Error 69: File  
‘svg.breadboard.NRF24L01 PA LNA\_01b006a924f7bb05e858c63cbb383901\_2\_breadboard.svg.bak’  
At line 19

Found a drawing element before a layerId (or no layerId)

Error 18: File  
‘part.NRF24L01 PA LNA\_c82162868d16b3dfad6bcd684673c93b\_9.fzp.bak’

Connector connector0terminal is in the fzp file but not the svg file. (typo?)

svg svg.schematic.NRF24L01 PA LNA\_01b006a924f7bb05e858c63cbb383901\_2\_schematic.svg.bak

Error 18: File  
‘part.NRF24L01 PA LNA\_c82162868d16b3dfad6bcd684673c93b\_9.fzp.bak’

Connector connector0pin is in the fzp file but not the svg file. (typo?)

svg svg.schematic.NRF24L01 PA LNA\_01b006a924f7bb05e858c63cbb383901\_2\_schematic.svg.bak

Error 69: File  
‘svg.pcb.NRF24L01 PA LNA\_01b006a924f7bb05e858c63cbb383901\_2\_pcb.svg.bak’  
At line 13

Found a drawing element before a layerId (or no layerId)

If you haven’t seen it this tutorial on parts making may be of help

> [@Part creation howto part 1 breadboard and pcb](https://forum.fritzing.org/t/part-creation-howto-part-1-breadboard-and-pcb/7692):
>
> Someone in this forum post requested help to fix up a part. So while doing that I decided to record what I needed to do in order to fix the part to provide a tutorial to create new / fix broken parts. If you start from the Tarjeta S4A EDU.fzpz file posted in the above thread, you should be able to recreate my improved part posted in the same thread. I started by loading the original part in to Fritzing, that indicates breadboard is (at first look anyway) pretty good, but schematic and pcb are…

Peter

---

_[View the full topic](https://forum.fritzing.org/t/nrf24l01-pa-lna/19800)._