# NodeMcu V3 parts library **URL:** \ **Category:** parts help\ **Created:** [March 29, 2017, 2:47pm UTC](https://forum.fritzing.org/t/nodemcu-v3-parts-library/3422 "2017-03-29T14:47:51Z")\ **Posts on this page:** 1\ **Showing post:** 4
**Author:** ![vanepp](https://forum.fritzing.org/user_avatar/forum.fritzing.org/vanepp/32/4426_2.png) [@vanepp](https://forum.fritzing.org/u/vanepp)\ **Post date:** [March 31, 2017, 1:04am UTC](https://forum.fritzing.org/t/nodemcu-v3-parts-library/3422/4 "2017-03-31T01:04:06Z")
Any Fritzing part in fzpz format contains the necessary files to modify it (an fpz file and 4 svg files all zipped typically). However I’m unclear what the pin spacing issue is. From the photo the pins appear to be standard .1 in (2.54mm) spaced header strips. That matches the pin spacing in the part from github. Does the board you have use something like 2mm headers? Or is the issue spacing between the sets of pins (the github part is .9 inches wide which is pretty standard for these types of thing is yours more or less than this spacing)? Parts modification is fairly complex although useful to learn if you want to use Fritzing. If this is all you want to do it may be easiest for me to make the changes for you. To do that I need the dimensions of the changes you need made (typically I use vernier calipers to measure the dimensions on the board and get close to the position and size of mounting holes). There are a couple of tutorials on making parts using Inkscape (an open source svg editor) available here: > [@A new part creation HowTo (long! So long it is in 2 posts)](http://forum.fritzing.org/t/a-new-part-creation-howto-long-so-long-it-is-in-2-posts/2238): > > (Edit: November 2016: This is an updated (and corrected) version of the original parts creation howto. This version corrects some suggestions (mostly saving Inkscape files as optimized svg which turns out to cause other problems) with the first version and expands the section on parts testing. While there doesn’t appear to be a lot of interest in this subject I’ll make at least this update so the information is as correct as I can get it.) This is a description of how I made the Valor PM6078-00… > [@Fritzing PART CREATION Video Tutorial Series](http://forum.fritzing.org/t/fritzing-part-creation-video-tutorial-series/2647/3): > > Fritzing Part Creation - Chapter3 - Inkscape Advanced Essentials Learning how to draw in Inkscape - more features. 0:00 Overview 0:16 Select object with cursor and XML Editor 3:34 Manipulate special PDF’s in Inkscape 4:33 XML Editor - Direct drawing manipulation 6:05 XML Editor - Making group, moving object, changing layer height 7:27 Cursor - Changing layer height 8:21 Ruler 9:07 Grids 9:28 Snap selection 10:16 Drawing origin if you want to learn how. Ask questions here and one or another of us will probably answer as we need more people making parts. Peter --- _[View the full topic](https://forum.fritzing.org/t/nodemcu-v3-parts-library/3422)._