# Need part DQ420MA/ 2H Microstep driver **URL:** \ **Category:** parts help\ **Created:** [June 20, 2024, 11:14am UTC](https://forum.fritzing.org/t/need-part-dq420ma-2h-microstep-driver/23988 "2024-06-20T11:14:37Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![Jim\_F](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/j/b19c9b/32.png) [@Jim\_F](https://forum.fritzing.org/u/Jim_F)\ **Post date:** [June 20, 2024, 11:14am UTC](https://forum.fritzing.org/t/need-part-dq420ma-2h-microstep-driver/23988/1 "2024-06-20T11:14:37Z")
Hello everyone. I would be greatful if someone could help me with this part (DQ420MA/ 2H Microstep driver). I cannot find it and i need it only to connect it with other parts in Fritzing “Breadboard”.Thanks in advance ![DQ420MA](https://forum.fritzing.org/uploads/default/original/3X/5/a/5af57884fd25daa733a666ff0091e5537f00a1e5.jpeg) ---
**Author:** ![vanepp](https://forum.fritzing.org/user_avatar/forum.fritzing.org/vanepp/32/4426_2.png) [@vanepp](https://forum.fritzing.org/u/vanepp)\ **Post date:** [June 20, 2024, 2:28pm UTC](https://forum.fritzing.org/t/need-part-dq420ma-2h-microstep-driver/23988/2 "2024-06-20T14:28:33Z")
This is likely as close as there is (found with a google search for “fritzing part D!420MA/2H stepper motor driver”) > [@Looking for DM860A Stepper Motor Driver from Longs Motors Nema 23 Motor 1600 oz-in](https://forum.fritzing.org/t/looking-for-dm860a-stepper-motor-driver-from-longs-motors-nema-23-motor-1600-oz-in/4476/2): > > Doesn’t look to be one. However as it is relatively simple I made one from the data sheet (and thus it may or may not be correct). No pcb layer as it isn’t sensible to have one. edit: Update to add lettering in breadboard. edit1 (Mar 2023) found a nasty bug where the part will not be saved correctly in a .fzz sketch file. Please reload the part with this new one which has that bug corrected! [DM860A Stepper Motor Driver.fzpz](https://forum.fritzing.org/uploads/short-url/w3HNUzBqQwC5aVCEfE73urDXX7i.fzpz) (9.3 KB) (12.5 KB) Peter It isn’t exactly the same but may be close enough. I think there is also a 560 version although it doesn’t appear in the google search. Peter ---
**Author:** ![Jim\_F](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/j/b19c9b/32.png) [@Jim\_F](https://forum.fritzing.org/u/Jim_F)\ **Post date:** [June 20, 2024, 3:13pm UTC](https://forum.fritzing.org/t/need-part-dq420ma-2h-microstep-driver/23988/3 "2024-06-20T15:13:39Z")
Thanks Peter for your response. You are right, it is very close to what i am looking for but i want to be precise with what i have bought( DQ420MA). Do you think that its easy for the Fritzing team to create one for me? ---
**Author:** ![vanepp](https://forum.fritzing.org/user_avatar/forum.fritzing.org/vanepp/32/4426_2.png) [@vanepp](https://forum.fritzing.org/u/vanepp)\ **Post date:** [June 20, 2024, 3:15pm UTC](https://forum.fritzing.org/t/need-part-dq420ma-2h-microstep-driver/23988/4 "2024-06-20T15:15:45Z")
There isn’t directly a Fritzing team for parts, but I can modify the part easily enough to match what you want. Peter ---
**Author:** ![vanepp](https://forum.fritzing.org/user_avatar/forum.fritzing.org/vanepp/32/4426_2.png) [@vanepp](https://forum.fritzing.org/u/vanepp)\ **Post date:** [June 21, 2024, 12:14am UTC](https://forum.fritzing.org/t/need-part-dq420ma-2h-microstep-driver/23988/5 "2024-06-21T00:14:08Z")
This part should do what you want. PCB view has been suppressed as not useful, so it only has breadboard and schematic. [DQ420MA-2H.fzpz](https://forum.fritzing.org/uploads/short-url/nz3wKajnVvPPgWwoISdOim6UCQE.fzpz) (8.2 KB) Peter ---
**Author:** ![Jim\_F](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/j/b19c9b/32.png) [@Jim\_F](https://forum.fritzing.org/u/Jim_F)\ **Post date:** [June 21, 2024, 6:52am UTC](https://forum.fritzing.org/t/need-part-dq420ma-2h-microstep-driver/23988/6 "2024-06-21T06:52:50Z")
Hello Peter. Thank you so much for the part. You are the best! Of course i can use this to do my project. You really helped me!! I would also like to do something for return, for your kindness and for your time that you spent to create it. So please tell me… ---
**Author:** ![vanepp](https://forum.fritzing.org/user_avatar/forum.fritzing.org/vanepp/32/4426_2.png) [@vanepp](https://forum.fritzing.org/u/vanepp)\ **Post date:** [June 21, 2024, 8:50pm UTC](https://forum.fritzing.org/t/need-part-dq420ma-2h-microstep-driver/23988/7 "2024-06-21T20:50:26Z")
> [@Jim\_F](#): > > I would also like to do something for return, for your kindness and for your time that you spent to create it. So please tell me… I’m good, in general making parts is fun (if you have sufficient experience at it!) and I’m much better at it than I am at development so I do it. Peter