# MSOP‑10\_3x3mm\_P0.5mm Footprint needed

**URL:** <https://forum.fritzing.org/t/msop-10-3x3mm-p0-5mm-foot-prind-gesucht/34107>\
**Category:** parts help\
**Created:** [May 16, 2026, 5:32pm UTC](https://forum.fritzing.org/t/msop-10-3x3mm-p0-5mm-foot-prind-gesucht/34107 "2026-05-16T17:32:38Z")\
**Posts on this page:** 1\
**Showing post:** 5

<div class="post-metadata">

**Author:** ![Hans\_Werner\_Atzenhoe](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/h/a9adbd/32.png) [@Hans\_Werner\_Atzenhoe](https://forum.fritzing.org/u/Hans_Werner_Atzenhoe)\
**Post date:** [May 17, 2026, 7:01am UTC](https://forum.fritzing.org/t/msop-10-3x3mm-p0-5mm-foot-prind-gesucht/34107/5 "2026-05-17T07:01:22Z")

</div>

Hey Harald,  
So far so good… I have Linux, do you know if my Inkscape can do that too?  
I downloaded it once…  
Peter once made one like that for me but the gap was 0.10mm, the spacing of the IC is 0.5mm — couldn’t the IC be edited more easily?  
[Si5351A.fzpz](https://forum.fritzing.org/uploads/short-url/91zF24s5FYCFlwTRT6XCZTnqNHL.fzpz) (5.0 KB)  
The only catch with the whole thing is that when trying to install it, Fritzing complained…

---

_[View the full topic](https://forum.fritzing.org/t/msop-10-3x3mm-p0-5mm-foot-prind-gesucht/34107)._