# Modified SVG file, schematic is updated but in PCB not changes **URL:** \ **Category:** beginners\ **Created:** [September 11, 2023, 8:23pm UTC](https://forum.fritzing.org/t/modified-svg-file-schematic-is-updated-but-in-pcb-not-changes/20498 "2023-09-11T20:23:16Z")\ **Posts on this page:** 1\ **Showing post:** 2
**Author:** ![vanepp](https://forum.fritzing.org/user_avatar/forum.fritzing.org/vanepp/32/4426_2.png) [@vanepp](https://forum.fritzing.org/u/vanepp)\ **Post date:** [September 11, 2023, 8:38pm UTC](https://forum.fritzing.org/t/modified-svg-file-schematic-is-updated-but-in-pcb-not-changes/20498/2 "2023-09-11T20:38:13Z")
The first thing to do is a google search like this “fritzing part Heltec ESP32 WiFi V3 Oled” which will find parts that are not in core parts. In this case that doesn’t appear to include this board although there are number of others available. Unfortunately making parts is a complex task. These two tutorials apply to the current versions of Fritzing > [@Fritzing PART CREATION Video Tutorial Series](http://forum.fritzing.org/t/fritzing-part-creation-video-tutorial-series/2647): > > NEW FASTER PART MAKING VIDEOS AT THE BOTTOM-[Fritzing Parts Fast](https://forum.fritzing.org/t/fritzing-part-creation-video-tutorial-series/2647/19) ADVANCED FRITZING USER TIPS & TRICKS VIDEOS AT THE BOTTOM-[Fritzing Adv Tips & Tricks](https://forum.fritzing.org/t/fritzing-part-creation-video-tutorial-series/2647/15) A series of part creation videos - I’m not an expert, but there was nothing else around at the time. Use 1080p HD fullscreen to see details clearly - use gear symbol bottom right -. Recorded slowly for older people, so select a higher speed if it’s too slow. P.S. - Sorry about the voice/sound yum Fritzing Part Creation - Chapter1 - New Part … > [@Part creation howto part 1 breadboard and pcb](https://forum.fritzing.org/t/part-creation-howto-part-1-breadboard-and-pcb/7692): > > Someone in this forum post requested help to fix up a part. So while doing that I decided to record what I needed to do in order to fix the part to provide a tutorial to create new / fix broken parts. If you start from the Tarjeta S4A EDU.fzpz file posted in the above thread, you should be able to recreate my improved part posted in the same thread. I started by loading the original part in to Fritzing, that indicates breadboard is (at first look anyway) pretty good, but schematic and pcb are… and may help if you want to do it yourself. If you need a small number of boards done (such as only this one) it is usually easier to get someone like me who is familiar with making and modifying parts to do it for you. It isn’t all that difficult for me, but is likely a lot less so for you. Peter --- _[View the full topic](https://forum.fritzing.org/t/modified-svg-file-schematic-is-updated-but-in-pcb-not-changes/20498)._