# Missing Atlas Scientific Parts

**URL:** <https://forum.fritzing.org/t/missing-atlas-scientific-parts/15635>\
**Category:** parts help\
**Created:** [April 6, 2022, 2:18am UTC](https://forum.fritzing.org/t/missing-atlas-scientific-parts/15635 "2022-04-06T02:18:57Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Awesomaki](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/a/90ced4/32.png) [@Awesomaki](https://forum.fritzing.org/u/Awesomaki)\
**Post date:** [April 6, 2022, 2:18am UTC](https://forum.fritzing.org/t/missing-atlas-scientific-parts/15635/1 "2022-04-06T02:18:58Z")

</div>

Hello,

I was wondering if someone could help me make the following parts (Atlas Scientific). I found most of the parts I needed through searching the forum, but couldnt find these:

> **[EZO-O2™ Embedded Oxygen Sensor | Atlas Scientific](https://atlas-scientific.com/probes/oxygen-sensor/)**
>
> The Atlas Scientific gaseous oxygen sensor has been designed to read O2 levels from 0 – 42,000 ppt.

> **[EZO™ Humidity Circuit | Atlas Scientific](https://atlas-scientific.com/product/ezo-humidity-circuit/)**
>
> Here at Atlas Scientific, we need very accurate humidity monitoring. If the humidity is too high, we can’t manufacture sensors; if it’s too low static electricity becomes an issue.

/probes/humidity-probe/  
/probes/3-4-flow-meter/

(I can’t put more then 2 links as a new user, I’m sorry if editing this way is against the rules):

I searched google for fritzing oxygen sensor #ezo-o2 & fritzing oxygen sensor #Sen-206F with no luck

---

<div class="post-metadata">

**Author:** ![vanepp](https://forum.fritzing.org/user_avatar/forum.fritzing.org/vanepp/32/4426_2.png) [@vanepp](https://forum.fritzing.org/u/vanepp)\
**Post date:** [April 6, 2022, 6:03pm UTC](https://forum.fritzing.org/t/missing-atlas-scientific-parts/15635/2 "2022-04-06T18:03:32Z")

</div>

Rather than edit the post (which makes it unclear!) I think you could have posted the first two as you did originally and then done another reply which would have let you add the third link. In any case here are the three parts

[Atlas-EZO-02.fzpz](https://forum.fritzing.org/uploads/short-url/uouMmPKeUuZGZWrKD18SKomGh4t.fzpz) (5.3 KB)

[Atlas-EZO-HUM-C.fzpz](https://forum.fritzing.org/uploads/short-url/hZXwAeWyDiHl4bUqc84rMjI4tyn.fzpz) (12.5 KB)

[Atlas-sen206f-3-8in-flow-meter.fzpz](https://forum.fritzing.org/uploads/short-url/cgXOnXqlSw7eS1K7DQ6t5iWyuab.fzpz) (6.3 KB)

Peter