# MH-ET LIVE Barcode Scanner V3.0 **URL:** \ **Category:** parts help\ **Created:** [March 10, 2022, 6:17pm UTC](https://forum.fritzing.org/t/mh-et-live-barcode-scanner-v3-0/15379 "2022-03-10T18:17:16Z")\ **Posts on this page:** 1\ **Showing post:** 4
**Author:** ![microMerlin](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/m/76d3ee/32.png) [@microMerlin](https://forum.fritzing.org/u/microMerlin)\ **Post date:** [March 10, 2022, 9:45pm UTC](https://forum.fritzing.org/t/mh-et-live-barcode-scanner-v3-0/15379/4 "2022-03-10T21:45:29Z")
Are you looking for a schematic for the board, or a Fritzing part for it? For the part, something like a data sheet is needed. That includes the physical dimensions of the board, and where and what each of the external connections are. That appears to have a couple of USB connectors, and maybe some jumpers. Likely no PCB view is needed. It does not look like it is soldered onto a pcb. Maybe mounted on, but the electrical connections look like just the USB. It is those details that are needed to create a Fritzing part. If you want to learn to make parts yourself, these two sets of tutorials apply to the current versions of Fritzing (most of the others are for older versions of the software.) Using Eagle2Fritzing is more difficult yet (for starters you need a Fritzing development environment to build Eagle2Fritzing!) If you need a small number of parts, it is easier to convince one of us that know parts making to make them for you. That said we are always willing to help people to make parts as everyone benefits from more people willing and able to make parts. > [@Fritzing PART CREATION Video Tutorial Series](https://forum.fritzing.org/t/fritzing-part-creation-video-tutorial-series/2647): > > NEW FASTER PART MAKING VIDEOS AT THE BOTTOM-[Fritzing Parts Fast](https://forum.fritzing.org/t/fritzing-part-creation-video-tutorial-series/2647/19) ADVANCED FRITZING USER TIPS & TRICKS VIDEOS AT THE BOTTOM-[Fritzing Adv Tips & Tricks](https://forum.fritzing.org/t/fritzing-part-creation-video-tutorial-series/2647/15) A series of part creation videos - I’m not an expert, but there was nothing else around at the time. Use 1080p HD fullscreen to see details clearly - use gear symbol bottom right -. Recorded slowly for older people, so select a higher speed if it’s too slow. P.S. - Sorry about the voice/sound yum Fritzing Part Creation - Chapter1 - New Part … > [@Part creation howto part 1 breadboard and pcb](https://forum.fritzing.org/t/part-creation-howto-part-1-breadboard-and-pcb/7692): > > Someone in this forum post requested help to fix up a part. So while doing that I decided to record what I needed to do in order to fix the part to provide a tutorial to create new / fix broken parts. If you start from the Tarjeta S4A EDU.fzpz file posted in the above thread, you should be able to recreate my improved part posted in the same thread. I started by loading the original part in to Fritzing, that indicates breadboard is (at first look anyway) pretty good, but schematic and pcb are… --- _[View the full topic](https://forum.fritzing.org/t/mh-et-live-barcode-scanner-v3-0/15379)._