# MAX3421E part making

**URL:** <https://forum.fritzing.org/t/max3421e-part-making/33489>\
**Category:** parts help\
**Created:** [December 2, 2025, 6:42pm UTC](https://forum.fritzing.org/t/max3421e-part-making/33489 "2025-12-02T18:42:04Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![franiuxd12](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/f/cdc98d/32.png) [@franiuxd12](https://forum.fritzing.org/u/franiuxd12)\
**Post date:** [December 2, 2025, 6:42pm UTC](https://forum.fritzing.org/t/max3421e-part-making/33489/1 "2025-12-02T18:42:04Z")

</div>

Hey, i need someone to make me this part:

 ![MAX3421E_module_3_pinout](https://forum.fritzing.org/uploads/default/original/3X/2/5/25c4ca7630034c8cd64f48c30cf882d2dc73eade.jpeg)

[https://www.analog.com/media/en/technical-documentation/data-sheets/max3421e.pdf](https://www.analog.com/media/en/technical-documentation/data-sheets/max3421e.pdf)

the faster the better

---

<div class="post-metadata">

**Author:** ![vanepp](https://forum.fritzing.org/user_avatar/forum.fritzing.org/vanepp/32/4426_2.png) [@vanepp](https://forum.fritzing.org/u/vanepp)\
**Post date:** [December 3, 2025, 3:55pm UTC](https://forum.fritzing.org/t/max3421e-part-making/33489/2 "2025-12-03T15:55:58Z")

</div>

Most of the required information here (the pinout display is excellent!), the only thing missing is this web site

> **[Mini USB Host Shield 2,0 für Arduino Adk SLR Entwicklungs tool - AliExpress 502](https://de.aliexpress.com/i/1005006295275946.html?gatewayAdapt=glo2deu)**
>
> Smarter Shopping, Better Living! Aliexpress.com

which provides the physical dimensions of the board (38mmx18mm) and where someone could buy one (at least for now.) The board layout is very poor as the active pins are all on the bottom of the board with many NC (no connection) pads on the sides that would have been a better use for active pins. In any case this part should do what you want and can be routed successfully in pcb

[Max3421E-breakout.fzpz](https://forum.fritzing.org/uploads/short-url/nA7TzoPbtXfxa4kE07Q3b7Dx8hN.fzpz) (12.1 KB)

which with the grid size set to 0.025in routes and passes default DRC settings:

 ![capture](https://forum.fritzing.org/uploads/default/original/3X/e/a/ea65d6b4bba636a63e020512522da64238f36744.jpeg)

although it isn’t easy to route.

Peter

---

<div class="post-metadata">

**Author:** ![franiuxd12](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/f/cdc98d/32.png) [@franiuxd12](https://forum.fritzing.org/u/franiuxd12)\
**Post date:** [December 3, 2025, 7:36pm UTC](https://forum.fritzing.org/t/max3421e-part-making/33489/3 "2025-12-03T19:36:41Z")

</div>

thank you sooooo much

---

<div class="post-metadata">

**Author:** ![franiuxd12](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/f/cdc98d/32.png) [@franiuxd12](https://forum.fritzing.org/u/franiuxd12)\
**Post date:** [December 3, 2025, 7:37pm UTC](https://forum.fritzing.org/t/max3421e-part-making/33489/4 "2025-12-03T19:37:56Z")

</div>

i dont really need the functionality i just want the look and pins to know how to wire them to my circuit board

---

<div class="post-metadata">

**Author:** ![vanepp](https://forum.fritzing.org/user_avatar/forum.fritzing.org/vanepp/32/4426_2.png) [@vanepp](https://forum.fritzing.org/u/vanepp)\
**Post date:** [December 3, 2025, 7:56pm UTC](https://forum.fritzing.org/t/max3421e-part-making/33489/5 "2025-12-03T19:56:14Z")

</div>

That’s probably to the good, because I don’t think pcb will work all that well 🙂 , the board appears to be made to use jumper wires not on a pcb (otherwise they would have made wiser pin choices!)

Peter
