# LTC2983 integrated circuit

**URL:** <https://forum.fritzing.org/t/ltc2983-integrated-circuit/33241>\
**Category:** parts help\
**Created:** [October 21, 2025, 1:04pm UTC](https://forum.fritzing.org/t/ltc2983-integrated-circuit/33241 "2025-10-21T13:04:47Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![famp](https://forum.fritzing.org/user_avatar/forum.fritzing.org/famp/32/26548_2.png) [@famp](https://forum.fritzing.org/u/famp)\
**Post date:** [October 21, 2025, 1:04pm UTC](https://forum.fritzing.org/t/ltc2983-integrated-circuit/33241/1 "2025-10-21T13:04:47Z")

</div>

**LTC2983❗**

**Top view❗**

**Datasheet❗**

Please add a link to PDF of the manufacturers datasheet. _Here, a link is fine._  
[https://www.analog.com/media/en/technical-documentation/data-sheets/2983fc.pdf](https://www.analog.com/media/en/technical-documentation/data-sheets/2983fc.pdf)

**Footprint**

**Type**  
 I did not read this  
 Breakout board, sub assembly, plug in module (A)  
 Antenna (AE)  
 Battery (BT)  
 Capacitor (C)  
 Diode (D)  
 Display (DS)  
 Fuse (F)  
 Hardware , mounting screws, etc. (H)  
 Jack, fixed part of a connector pair, header (J)  
 Relay (K)  
 Inductor, Coil, Ferrite bead (L)  
 Loudspeaker, Buzzer (LS)  
 Motor (M)  
 Microphone (MK)  
 Plug, moveable part of a connector pair (P)  
 Transistor (Q)  
 Resistor (R)  
 Thermistor (RT)  
 Varistor (RV)  
 Switch (S)  
 Transformer (T)  
[X] Integrated Circuit (IC)  
 Crystal, Oscillator (Y)  
 Zender diode (Z)  
 Other (please specifiy)

 ![imagesq](https://forum.fritzing.org/uploads/default/original/3X/7/4/74252418b223199edfe90eac6393596deba114fb.jpeg)

---

<div class="post-metadata">

**Author:** ![vanepp](https://forum.fritzing.org/user_avatar/forum.fritzing.org/vanepp/32/4426_2.png) [@vanepp](https://forum.fritzing.org/u/vanepp)\
**Post date:** [October 21, 2025, 1:57pm UTC](https://forum.fritzing.org/t/ltc2983-integrated-circuit/33241/2 "2025-10-21T13:57:38Z")

</div>

You can make one for yourself using this tutorial and the generic IC (which is available in lgfp-48) using this tutorial”

> [@Part creation howto part13-ICs](https://forum.fritzing.org/t/part-creation-howto-part13-ics/27093/2):
>
> Chapter 1.1: ICs (DIP package) You are going to be creating an MCP3008 IC in this chapter The main reason why I created this part is because the one by Adafruit doesn’t look very nice (the schematic is gigantic!) When you access the datasheet here: You’ll see that on the first page, there is the pinout of the part Please save this image somewhere as you’ll need it later. Then, follow the steps below. Open Fritzing, go to the breadboard tab and delete the breadboard. Drag…

Peter

---

<div class="post-metadata">

**Author:** ![KjellM](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/k/a3d4f5/32.png) [@KjellM](https://forum.fritzing.org/u/KjellM)\
**Post date:** [October 21, 2025, 4:12pm UTC](https://forum.fritzing.org/t/ltc2983-integrated-circuit/33241/3 "2025-10-21T16:12:47Z")

</div>

There is a generic LQFP-48 part in Fritzing, that you can try.

Use the search to find the LQFP–48 footprint, then click “Edit Pin Labels”

 ![image](https://forum.fritzing.org/uploads/default/original/3X/b/9/b9fb87b92378205e47c880df6e7aa9a92a150592.png)

After editing the PINs, you can right click the part and open in the editor,

for entering more metadata, and saving it as a distinct part for future reuse:

 ![image](https://forum.fritzing.org/uploads/default/original/3X/8/a/8a9add8f18fe56d0b4dbb8f45fb6ef2b6b04738c.png)

In Fritzing 1.0.6 which we released today, a bug around editing pin labels was fixed, so it might be worth updating.