# Looking for LTC3260 **URL:** \ **Category:** parts help\ **Created:** [May 14, 2024, 2:34pm UTC](https://forum.fritzing.org/t/looking-for-ltc3260/23568 "2024-05-14T14:34:54Z")\ **Posts on this page:** 5\ **Page:** 1
**Author:** ![Bouha](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/b/41988e/32.png) [@Bouha](https://forum.fritzing.org/u/Bouha)\ **Post date:** [May 14, 2024, 2:34pm UTC](https://forum.fritzing.org/t/looking-for-ltc3260/23568/1 "2024-05-14T14:34:54Z")
Does anyone know if the LTC3260 component is available in Fritzing, or does anyone have an idea on how to create this component? ---
**Author:** ![vanepp](https://forum.fritzing.org/user_avatar/forum.fritzing.org/vanepp/32/4426_2.png) [@vanepp](https://forum.fritzing.org/u/vanepp)\ **Post date:** [May 14, 2024, 3:05pm UTC](https://forum.fritzing.org/t/looking-for-ltc3260/23568/2 "2024-05-14T15:05:33Z")
There doesn’t appear to be a part. You can create one by using the generic IC and changing the pin labels ![image](https://forum.fritzing.org/uploads/default/original/3X/3/c/3c9f7b647b9de242b1fa8f8028e01e92577642d8.png) ![capture1](https://forum.fritzing.org/uploads/default/original/3X/b/5/b5134ec4116a7f0ea0abfb843d82757865c8b88a.jpeg) Peter ---
**Author:** ![Bouha](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/b/41988e/32.png) [@Bouha](https://forum.fritzing.org/u/Bouha)\ **Post date:** [May 14, 2024, 3:18pm UTC](https://forum.fritzing.org/t/looking-for-ltc3260/23568/3 "2024-05-14T15:18:35Z")
Thank you, Peter! Do you perhaps also know how to create the block diagram of the chip if you are simulating the circuit? Or is it perhaps better to just build the block diagram? ---
**Author:** ![Bouha](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/b/41988e/32.png) [@Bouha](https://forum.fritzing.org/u/Bouha)\ **Post date:** [May 14, 2024, 3:20pm UTC](https://forum.fritzing.org/t/looking-for-ltc3260/23568/4 "2024-05-14T15:20:44Z")
[ltc3260.pdf (analog.com)](https://www.analog.com/media/en/technical-documentation/data-sheets/ltc3260.pdf) page 8 ---
**Author:** ![vanepp](https://forum.fritzing.org/user_avatar/forum.fritzing.org/vanepp/32/4426_2.png) [@vanepp](https://forum.fritzing.org/u/vanepp)\ **Post date:** [May 14, 2024, 3:24pm UTC](https://forum.fritzing.org/t/looking-for-ltc3260/23568/5 "2024-05-14T15:24:31Z")
For the block diagram you would need to create a custom part (these two tutorials detail how to do that although it is quite difficult) > [@Fritzing PART CREATION Video Tutorial Series](http://forum.fritzing.org/t/fritzing-part-creation-video-tutorial-series/2647): > > NEW FASTER PART MAKING VIDEOS AT THE BOTTOM-[Fritzing Parts Fast](https://forum.fritzing.org/t/fritzing-part-creation-video-tutorial-series/2647/19) ADVANCED FRITZING USER TIPS & TRICKS VIDEOS AT THE BOTTOM-[Fritzing Adv Tips & Tricks](https://forum.fritzing.org/t/fritzing-part-creation-video-tutorial-series/2647/15) A series of part creation videos - I’m not an expert, but there was nothing else around at the time. Use 1080p HD fullscreen to see details clearly - use gear symbol bottom right -. Recorded slowly for older people, so select a higher speed if it’s too slow. P.S. - Sorry about the voice/sound yum Fritzing Part Creation - Chapter1 - New Part … > [@Part creation howto part 1 breadboard and pcb](https://forum.fritzing.org/t/part-creation-howto-part-1-breadboard-and-pcb/7692): > > Someone in this forum post [http://forum.fritzing.org/t/tarjeta-s4a-edu-pieza-en-proceso-solamente-falta-la-imagen-en-pcb-y-en-esquematico/7487](http://forum.fritzing.org/t/tarjeta-s4a-edu-pieza-en-proceso-solamente-falta-la-imagen-en-pcb-y-en-esquematico/7487) requested help to fix up a part. So while doing that I decided to record what I needed to do in order to fix the part to provide a tutorial to create new / fix broken parts. If you start from the Tarjeta S4A EDU.fzpz file posted in the above thread, you should be able to recreate my improved part posted in the same thread. I started by loading the origi… I lately learned there aren’t links to the videos in Old\_Grey’s tutorial so you need to do a google search for the title and then they come up on YouTube. simulation requires a spice model in the part (and currently only does DC simulation) which is yet more complex. Peter