# Looking for keystudio microbit expansion board

**URL:** <https://forum.fritzing.org/t/looking-for-keystudio-microbit-expansion-board/11251>\
**Category:** parts help\
**Created:** [November 2, 2020, 7:21am UTC](https://forum.fritzing.org/t/looking-for-keystudio-microbit-expansion-board/11251 "2020-11-02T07:21:06Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Hemavathi](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/h/c2a13f/32.png) [@Hemavathi](https://forum.fritzing.org/u/Hemavathi)\
**Post date:** [November 2, 2020, 7:21am UTC](https://forum.fritzing.org/t/looking-for-keystudio-microbit-expansion-board/11251/1 "2020-11-02T07:21:06Z")

</div>

can you please help me how to add keystudio microbit in fritizing

---

<div class="post-metadata">

**Author:** ![flaix](https://forum.fritzing.org/user_avatar/forum.fritzing.org/flaix/32/8066_2.png) [@flaix](https://forum.fritzing.org/u/flaix)\
**Post date:** [November 2, 2020, 8:50am UTC](https://forum.fritzing.org/t/looking-for-keystudio-microbit-expansion-board/11251/2 "2020-11-02T08:50:44Z")

</div>

Last link on the page:  
[https://tech.microbit.org/hardware/](https://tech.microbit.org/hardware/)

Also:

> **[topshed/FritzingParts](https://github.com/topshed/FritzingParts)**
>
> Contribute to topshed/FritzingParts development by creating an account on GitHub.

---

<div class="post-metadata">

**Author:** ![vanepp](https://forum.fritzing.org/user_avatar/forum.fritzing.org/vanepp/32/4426_2.png) [@vanepp](https://forum.fritzing.org/u/vanepp)\
**Post date:** [November 8, 2020, 11:20pm UTC](https://forum.fritzing.org/t/looking-for-keystudio-microbit-expansion-board/11251/3 "2020-11-08T23:20:18Z")

</div>

If you are looking for the Micro:bit itself, there is an improved version available in the forums here:

> [@Improved Micro:bit part](https://forum.fritzing.org/t/improved-micro-bit-part/7288):
>
> Here is an improved Micro:bit part. This one has schematic and pcb as well as breadboard. Pcb uses an edge connector (because that is how the Micro:bit connects) to connect to the pcb. edit: I just replaced this with a newer version of the part which has been created as a board and tested. [Microbit.fzpz](https://forum.fritzing.org/uploads/default/original/2X/8/86a613dbfd59adffd2466d972a68eb75da464167.fzpz) (35.1 KB) and a sketch that uses it (because the new part has no silkscreen text …) [microbit-breakout.fzz](https://forum.fritzing.org/uploads/default/original/2X/2/27d0ee55d58c4bc88c1c568b95f8ecd1d64b6578.fzz) (39.2 KB) Peter

which is an improved version of the part referenced at the bottom of the page linked to above. I have also done a couple of breakout boards for the micro:bit (also in this forum.) If you are looking for the entire starter kit, there may not be one but the some or all of the basic parts may be available,.

Peter