# Looking for an Arduino proto-shield library part

**URL:** <https://forum.fritzing.org/t/looking-for-an-arduino-proto-shield-library-part/20696>\
**Category:** uncategorized\
**Created:** [October 1, 2023, 6:26am UTC](https://forum.fritzing.org/t/looking-for-an-arduino-proto-shield-library-part/20696 "2023-10-01T06:26:26Z")\
**Posts on this page:** 10\
**Page:** 1

<div class="post-metadata">

**Author:** ![Lupus52](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/l/ea5d25/32.png) [@Lupus52](https://forum.fritzing.org/u/Lupus52)\
**Post date:** [October 1, 2023, 6:26am UTC](https://forum.fritzing.org/t/looking-for-an-arduino-proto-shield-library-part/20696/1 "2023-10-01T06:26:26Z")

</div>

Hello,

has anybody this part-file or an link?

 ![proto](https://forum.fritzing.org/uploads/default/original/3X/7/8/78df9830bdeb14bcfbca8cd8abf1b07cb647b4ee.jpeg)

---

<div class="post-metadata">

**Author:** ![vanepp](https://forum.fritzing.org/user_avatar/forum.fritzing.org/vanepp/32/4426_2.png) [@vanepp](https://forum.fritzing.org/u/vanepp)\
**Post date:** [October 1, 2023, 2:37pm UTC](https://forum.fritzing.org/t/looking-for-an-arduino-proto-shield-library-part/20696/2 "2023-10-01T14:37:46Z")

</div>

This is likely as close as there is at least for now.

> [@Looking for an Arduino proto-shield library part that I KNOW exists somewhere](https://forum.fritzing.org/t/looking-for-an-arduino-proto-shield-library-part-that-i-know-exists-somewhere/12989/2):
>
> I expect you are looking for this: [https://forums.adafruit.com/viewtopic.php?f=31&t=36560](https://forums.adafruit.com/viewtopic.php?f=31&t=36560) which at least on Fritzing 0.9.6 produces this: The reason for the 0.9.6 restriction is that I believe breadboards are always supposed to be on the bottom and not movable, but in 0.9.6 (at least) that doesn’t seen to be true. I can make the breadboard on top. I’m not sure if this is 0.9.6 specific or I misunderstood breadboards. edit: Learned something new again! The trick here is this part …

edit:

note it is possible (but a fair amount of work) to make a custom part that fits this exact board.

Peter

---

<div class="post-metadata">

**Author:** ![Lupus52](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/l/ea5d25/32.png) [@Lupus52](https://forum.fritzing.org/u/Lupus52)\
**Post date:** [October 2, 2023, 10:55am UTC](https://forum.fritzing.org/t/looking-for-an-arduino-proto-shield-library-part/20696/3 "2023-10-02T10:55:44Z")

</div>

Hello and thank you,

I search a really blank part with only wholes in the raster and the 2 pin-rows for the Arduino. No connectors for passive elements or a breadboard.

I will try to make one in the winter . Before I must learn editing. I have downloaded all videos.

Best regards  
Wolfgang

---

<div class="post-metadata">

**Author:** ![vanepp](https://forum.fritzing.org/user_avatar/forum.fritzing.org/vanepp/32/4426_2.png) [@vanepp](https://forum.fritzing.org/u/vanepp)\
**Post date:** [October 2, 2023, 3:25pm UTC](https://forum.fritzing.org/t/looking-for-an-arduino-proto-shield-library-part/20696/4 "2023-10-02T15:25:27Z")

</div>

Unfortunately a protoboard is a variation of a breadboard and thus fairly complex to make (with a lot of special, mostly undocumented requirements in the fzp file.) If you have a flat jpg inage of the board and its dimensions (height and width) I’ll look at making one.

Peter

---

<div class="post-metadata">

**Author:** ![microMerlin](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/m/76d3ee/32.png) [@microMerlin](https://forum.fritzing.org/u/microMerlin)\
**Post date:** [October 2, 2023, 5:28pm UTC](https://forum.fritzing.org/t/looking-for-an-arduino-proto-shield-library-part/20696/5 "2023-10-02T17:28:59Z")

</div>

Here is something you might be able to use as a base. This is a template for creating a shield part for an arduino uno. It is not a complete part as is. Download and unzip to get fzp file, plus breadboard and schematic svg images. Breadboard is that main file you probably want. The fzp might be helpful as well.  
[uno\_shield\_template.fzpz](https://forum.fritzing.org/uploads/short-url/khLezBYyeaW7wIxhUmdP0kFcRFT.fzpz) (7.6 KB)

---

<div class="post-metadata">

**Author:** ![vanepp](https://forum.fritzing.org/user_avatar/forum.fritzing.org/vanepp/32/4426_2.png) [@vanepp](https://forum.fritzing.org/u/vanepp)\
**Post date:** [October 2, 2023, 7:57pm UTC](https://forum.fritzing.org/t/looking-for-an-arduino-proto-shield-library-part/20696/6 "2023-10-02T19:57:46Z")

</div>

I found an acceptable image here

> **[Prototype PCB for Arduino UNO R3 Shield Board DIY.](https://czh-labs.com/products/prototype-pcb-for-arduino-uno-r3-shield-board-diy?gclid=EAIaIQobChMI5ICh0I7YgQMVwAqtBh1a2ANMEAQYAyABEgIrjvD_BwE)**
>
> ELECTRONICS-SALON Prototype PCB for Arduino UNO R3 Shield Board DIY.

If this matches your board (which it mostly appears to) it will serve as a base.

![73ddd45bb8.jpg.240x240](https://forum.fritzing.org/uploads/default/original/3X/2/c/2c1e7f4b549e8c737465c39b5886d24f5752e895.jpeg)

here the jpg image above is imported to Inkscape and scaled and overlaid on the pcb svg from a UNO ICSP. It appears to match, so a part can be made from this fairly easily (at least for me.) A clearer image of the lettering on your actual board would help if you have one.

 ![capture](https://forum.fritzing.org/uploads/default/original/3X/c/0/c0f5fa19474ebae4f8e29b0aa7c6da40c730e714.jpeg)

The icsp pins serve to validate the body pin spacing here …

Peter

---

<div class="post-metadata">

**Author:** ![Lupus52](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/l/ea5d25/32.png) [@Lupus52](https://forum.fritzing.org/u/Lupus52)\
**Post date:** [October 2, 2023, 9:05pm UTC](https://forum.fritzing.org/t/looking-for-an-arduino-proto-shield-library-part/20696/7 "2023-10-02T21:05:22Z")

</div>

Hello Peter,

very great!

I have a picture which seems to be a litte bit better

 ![Proto](https://forum.fritzing.org/uploads/default/original/3X/0/a/0a40851c287eec349e43ff5e2134beb711fe3dab.jpeg)

Best regards  
Wolfgang

---

<div class="post-metadata">

**Author:** ![vanepp](https://forum.fritzing.org/user_avatar/forum.fritzing.org/vanepp/32/4426_2.png) [@vanepp](https://forum.fritzing.org/u/vanepp)\
**Post date:** [October 2, 2023, 9:10pm UTC](https://forum.fritzing.org/t/looking-for-an-arduino-proto-shield-library-part/20696/8 "2023-10-02T21:10:00Z")

</div>

Yep that image is good enough to take the names off of. Breadboard is almost done (just working on extracting the path from the damn translates to get the board outline.)

 ![capture3](https://forum.fritzing.org/uploads/default/original/3X/4/3/43e9580db518ddbc13f2b9e31e3f487be1e2a5d1.jpeg)

all the pads are in place and ready to go just needs renumbering (which I have a script for.)

Peter

---

<div class="post-metadata">

**Author:** ![vanepp](https://forum.fritzing.org/user_avatar/forum.fritzing.org/vanepp/32/4426_2.png) [@vanepp](https://forum.fritzing.org/u/vanepp)\
**Post date:** [October 10, 2023, 3:28am UTC](https://forum.fritzing.org/t/looking-for-an-arduino-proto-shield-library-part/20696/9 "2023-10-10T03:28:21Z")

</div>

OK I finally worked out all my problems and I think this part does what you want.

[arduino-proto-shield.fzpz](https://forum.fritzing.org/uploads/short-url/wi0zYIYZeVwSFbIfXd6rRo9aqWo.fzpz) (18.7 KB)

The way I first did it didn’t reflect the connections in to schematic and pcb. This version does:

 ![capture](https://forum.fritzing.org/uploads/default/original/3X/6/e/6eceea3a975801f0cffd7c69e7ef35aa14156b69.jpeg)

 ![capture1](https://forum.fritzing.org/uploads/default/original/3X/5/5/556dad4cdb4e53bb92055b04aba3d2c2e87f5e8b.jpeg)

 ![capture2](https://forum.fritzing.org/uploads/default/original/3X/e/2/e274aab43b012da035d1713ba220e7f6b6b94339.jpeg)

Peter

---

<div class="post-metadata">

**Author:** ![Lupus52](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/l/ea5d25/32.png) [@Lupus52](https://forum.fritzing.org/u/Lupus52)\
**Post date:** [October 14, 2023, 4:02pm UTC](https://forum.fritzing.org/t/looking-for-an-arduino-proto-shield-library-part/20696/10 "2023-10-14T16:02:17Z")

</div>

Very great! Thank you very much.
