# Linear Voltage regulators **URL:** \ **Category:** parts help\ **Created:** [June 25, 2023, 8:23pm UTC](https://forum.fritzing.org/t/linear-voltage-regulators/19779 "2023-06-25T20:23:43Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![svardkel](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/s/e99b99/32.png) [@svardkel](https://forum.fritzing.org/u/svardkel)\ **Post date:** [June 25, 2023, 8:23pm UTC](https://forum.fritzing.org/t/linear-voltage-regulators/19779/1 "2023-06-25T20:23:44Z")
Hello, does anyone have an L7809CV and L78S24CV ? If not, would someone be able to assist in creating them? [STMicroelectronics L7809CV, 1 Linear Voltage, Voltage Regulator 1.5A, 9 V 3-Pin, TO-220 | RS (rs-online.com)](https://uk.rs-online.com/web/p/voltage-regulators/7140666?gb=s) [2 A positive voltage regulator IC (rs-online.com)](https://docs.rs-online.com/25aa/0900766b813e468d.pdf) Thanks. ---
**Author:** ![vanepp](https://forum.fritzing.org/user_avatar/forum.fritzing.org/vanepp/32/4426_2.png) [@vanepp](https://forum.fritzing.org/u/vanepp)\ **Post date:** [June 25, 2023, 11:29pm UTC](https://forum.fritzing.org/t/linear-voltage-regulators/19779/2 "2023-06-25T23:29:18Z")
The 7805 in core parts will work for both parts. The package is to220 and has the same pin out. A note, one or more of the Sparkfun 7805 parts are in 7905 pin out (which is incorrect) so don’ t use those. Peter ---
**Author:** ![svardkel](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/s/e99b99/32.png) [@svardkel](https://forum.fritzing.org/u/svardkel)\ **Post date:** [June 26, 2023, 7:32am UTC](https://forum.fritzing.org/t/linear-voltage-regulators/19779/3 "2023-06-26T07:32:44Z")
Thanks, I just noticed that there is an L78XX in the library. I will just use this and state the part above on the schematic. ---
**Author:** ![vanepp](https://forum.fritzing.org/user_avatar/forum.fritzing.org/vanepp/32/4426_2.png) [@vanepp](https://forum.fritzing.org/u/vanepp)\ **Post date:** [June 26, 2023, 2:27pm UTC](https://forum.fritzing.org/t/linear-voltage-regulators/19779/4 "2023-06-26T14:27:28Z")
The part number is usually editable in Inspector (the lower right window.) Peter ---
**Author:** ![ash\_jeyn22](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/a/ecae2f/32.png) [@ash\_jeyn22](https://forum.fritzing.org/u/ash_jeyn22)\ **Post date:** [May 9, 2024, 11:35pm UTC](https://forum.fritzing.org/t/linear-voltage-regulators/19779/5 "2024-05-09T23:35:11Z")
How to edit it to 7806? And display the description or label in the schematic? ---
**Author:** ![vanepp](https://forum.fritzing.org/user_avatar/forum.fritzing.org/vanepp/32/4426_2.png) [@vanepp](https://forum.fritzing.org/u/vanepp)\ **Post date:** [May 9, 2024, 11:46pm UTC](https://forum.fritzing.org/t/linear-voltage-regulators/19779/6 "2024-05-09T23:46:34Z")
It appears you would need to create a custom part (I thought you could change the part number in Inspector but that doesn’t appear to be true.) This these two tutorials should tell you the ways of doing that. > [@Fritzing PART CREATION Video Tutorial Series](http://forum.fritzing.org/t/fritzing-part-creation-video-tutorial-series/2647): > > NEW FASTER PART MAKING VIDEOS AT THE BOTTOM-[Fritzing Parts Fast](https://forum.fritzing.org/t/fritzing-part-creation-video-tutorial-series/2647/19) ADVANCED FRITZING USER TIPS & TRICKS VIDEOS AT THE BOTTOM-[Fritzing Adv Tips & Tricks](https://forum.fritzing.org/t/fritzing-part-creation-video-tutorial-series/2647/15) A series of part creation videos - I’m not an expert, but there was nothing else around at the time. Use 1080p HD fullscreen to see details clearly - use gear symbol bottom right -. Recorded slowly for older people, so select a higher speed if it’s too slow. P.S. - Sorry about the voice/sound yum Fritzing Part Creation - Chapter1 - New Part … > [@Part creation howto part 1 breadboard and pcb](https://forum.fritzing.org/t/part-creation-howto-part-1-breadboard-and-pcb/7692): > > Someone in this forum post [http://forum.fritzing.org/t/tarjeta-s4a-edu-pieza-en-proceso-solamente-falta-la-imagen-en-pcb-y-en-esquematico/7487](http://forum.fritzing.org/t/tarjeta-s4a-edu-pieza-en-proceso-solamente-falta-la-imagen-en-pcb-y-en-esquematico/7487) requested help to fix up a part. So while doing that I decided to record what I needed to do in order to fix the part to provide a tutorial to create new / fix broken parts. If you start from the Tarjeta S4A EDU.fzpz file posted in the above thread, you should be able to recreate my improved part posted in the same thread. I started by loading the origi… I lately learned there aren’t links to the videos in Old\_Grey’s tutorial so you need to do a google search for the title and then they come up on YouTube. Peter