# Limit Switch part

**URL:** <https://forum.fritzing.org/t/limit-switch-part/10140>\
**Category:** parts help\
**Created:** [June 21, 2020, 1:34pm UTC](https://forum.fritzing.org/t/limit-switch-part/10140 "2020-06-21T13:34:37Z")\
**Posts on this page:** 1\
**Showing post:** 13

<div class="post-metadata">

**Author:** ![just\_randy](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/j/9f8e36/32.png) [@just\_randy](https://forum.fritzing.org/u/just_randy)\
**Post date:** [July 3, 2020, 3:20am UTC](https://forum.fritzing.org/t/limit-switch-part/10140/13 "2020-07-03T03:20:48Z")

</div>

> [@vanepp](#):
>
> So in the breadboard svg, you need to figure out what connector number is associated with the pin that the S, G or V label is associated with and match that with the corresponding pin in schematic.

Yep, that is what I am trying to figure out, and thanks to @Old_Grey, I have an answer.

The part is attached to this post, but someone should run it through the parts checker script to make sure I didn’t miss anything. Anyone who runs this thru the parts checker will find errors in the PCB because there is nothing in the copper groups in the .svg file, it’s just a silkscreen. If there are any serious errors, let me know and i will fix them.

Randy

[Limit Switch.fzpz](https://forum.fritzing.org/uploads/short-url/zl4yhn2CfLg7yVzLN0wSVs9Nk7V.fzpz) (11.0 KB)

---

_[View the full topic](https://forum.fritzing.org/t/limit-switch-part/10140)._