# Lcd 0.96 in oled modul

**URL:** <https://forum.fritzing.org/t/lcd-0-96-in-oled-modul/15977>\
**Category:** parts submit\
**Created:** [May 17, 2022, 4:59am UTC](https://forum.fritzing.org/t/lcd-0-96-in-oled-modul/15977 "2022-05-17T04:59:37Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Dahn](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/d/a88e4f/32.png) [@Dahn](https://forum.fritzing.org/u/Dahn)\
**Post date:** [May 17, 2022, 4:59am UTC](https://forum.fritzing.org/t/lcd-0-96-in-oled-modul/15977/1 "2022-05-17T04:59:37Z")

</div>

boleh kah aku meminta untuk dibuatkan modul lcd 0.96in oled

 ![image](https://forum.fritzing.org/uploads/default/original/2X/9/9715484f89e75fc518124fa4efa1937cc994a9fc.jpeg)

berikut datasheet lcd 0.96 oled  
[https://electropeak.com/learn/download/0-96-inch-oled-display-module-datasheet/](https://electropeak.com/learn/download/0-96-inch-oled-display-module-datasheet/)

---

<div class="post-metadata">

**Author:** ![Blue](https://forum.fritzing.org/user_avatar/forum.fritzing.org/blue/32/4208_2.png) [@Blue](https://forum.fritzing.org/u/Blue)\
**Post date:** [May 17, 2022, 9:30am UTC](https://forum.fritzing.org/t/lcd-0-96-in-oled-modul/15977/2 "2022-05-17T09:30:37Z")

</div>

It should be on “Part help” category  
And the part is available everywhere… Search it…

---

<div class="post-metadata">

**Author:** ![vanepp](https://forum.fritzing.org/user_avatar/forum.fritzing.org/vanepp/32/4426_2.png) [@vanepp](https://forum.fritzing.org/u/vanepp)\
**Post date:** [May 17, 2022, 2:45pm UTC](https://forum.fritzing.org/t/lcd-0-96-in-oled-modul/15977/3 "2022-05-17T14:45:51Z")

</div>

This post should do.

> [@OLED 128x64 I2C Monochrome Display SSD1306 created](https://forum.fritzing.org/t/oled-128x64-i2c-monochrome-display-ssd1306-created/1202/13):
>
> In such a case we should make a second part that matches the other common version. Do you have a url to an example of the alternate part? edit: A search of Ebay turns up an even mix of both pin layouts so I have made two new parts, one for each pin out. As you noted it is necessary to make sure you have the correct part for the module you have, because using the other one (and reversing power and ground) will likely burn out your module! Note if you want mounting holes in pcb you need to drag …

Peter