# Kingbright L-710A8GE/1I1GD-RV

**URL:** <https://forum.fritzing.org/t/kingbright-l-710a8ge-1i1gd-rv/9540>\
**Category:** parts help\
**Created:** [May 6, 2020, 1:33pm UTC](https://forum.fritzing.org/t/kingbright-l-710a8ge-1i1gd-rv/9540 "2020-05-06T13:33:15Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![CuriousJames](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/c/7cd45c/32.png) [@CuriousJames](https://forum.fritzing.org/u/CuriousJames)\
**Post date:** [May 6, 2020, 1:33pm UTC](https://forum.fritzing.org/t/kingbright-l-710a8ge-1i1gd-rv/9540/1 "2020-05-06T13:33:15Z")

</div>

I’m looking to fit LEDs on my PCB more efficiently so I’ve purchased some of these, could you please make the Fritzing part for me Peter.

RS Product: [https://uk.rs-online.com/web/p/pcb-led-indicators/6164071/](https://uk.rs-online.com/web/p/pcb-led-indicators/6164071/)  
RS Datasheet: [https://docs.rs-online.com/a494/0900766b8098e779.pdf](https://docs.rs-online.com/a494/0900766b8098e779.pdf)

P.S.  
I’m working on a response to your amazing reply on my project, there’s just a lot to get through!

Thanks again!

---

<div class="post-metadata">

**Author:** ![vanepp](https://forum.fritzing.org/user_avatar/forum.fritzing.org/vanepp/32/4426_2.png) [@vanepp](https://forum.fritzing.org/u/vanepp)\
**Post date:** [May 6, 2020, 3:04pm UTC](https://forum.fritzing.org/t/kingbright-l-710a8ge-1i1gd-rv/9540/2 "2020-05-06T15:04:59Z")

</div>

> [@CuriousJames](#):
>
> I’m looking to fit LEDs on my PCB more efficiently so I’ve purchased some of these, could you please make the Fritzing part for me Peter.

Sure I can make one of these easily enough.

> [@CuriousJames](#):
>
> P.S.  
> I’m working on a response to your amazing reply on my project, there’s just a lot to get through!

Not a problem, this stuff gets amazingly complex even when there aren’t Fritzing bugs in play and it often takes a lot of time and a number of questions to get the mind around it. It does get easier with more experience though 🙂 .

edit:

and here is the requested part. As always before ordering boards, print out the footprint at 1:1 scale and check it against a real part!

[l710a8ge-dual-led.fzpz](https://forum.fritzing.org/uploads/short-url/p3UjjuaZejVxQDNWoi8OUWszzbS.fzpz) (5.6 KB)

Peter

---

<div class="post-metadata">

**Author:** ![CuriousJames](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/c/7cd45c/32.png) [@CuriousJames](https://forum.fritzing.org/u/CuriousJames)\
**Post date:** [May 13, 2020, 12:57pm UTC](https://forum.fritzing.org/t/kingbright-l-710a8ge-1i1gd-rv/9540/3 "2020-05-13T12:57:52Z")

</div>

That looks perfect to me, thanks very much!