# Is there a fritzing part for the wave share Pico-ResTouch-LCD-3 where the pico 2W plugs into the rear of the display PCB?

**URL:** <https://forum.fritzing.org/t/is-there-a-fritzing-part-for-the-wave-share-pico-restouch-lcd-3-where-the-pico-2w-plugs-into-the-rear-of-the-display-pcb/34303>\
**Category:** parts help\
**Created:** [July 9, 2026, 3:00pm UTC](https://forum.fritzing.org/t/is-there-a-fritzing-part-for-the-wave-share-pico-restouch-lcd-3-where-the-pico-2w-plugs-into-the-rear-of-the-display-pcb/34303 "2026-07-09T15:00:40Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![GRenken](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/g/a87d85/32.png) [@GRenken](https://forum.fritzing.org/u/GRenken)\
**Post date:** [July 9, 2026, 3:00pm UTC](https://forum.fritzing.org/t/is-there-a-fritzing-part-for-the-wave-share-pico-restouch-lcd-3-where-the-pico-2w-plugs-into-the-rear-of-the-display-pcb/34303/1 "2026-07-09T15:00:40Z")

</div>

_Please edit this message to let us know exactly what electronic part we are talking about. Creating parts is some work, so please be considerate and make it easy for us._

_We need the title, an image and the technical data, fields are marked with a ❗ . Without this infomation, the part **can not be created**._

_Search the part prepare before posting._  
_You can search for the part here:_

- _🔎 Top right here on this page_
- _🔎 Top right in Fritzing Application_
- _With the search form on [fritzing.org](http://fritzing.org) (“Go” in the top right area)_
- _Appending the terms “fritzing part” in your favorite search engine_

* * *

**Name of the part​❗**

**Your previous work, similar parts**  
In case there are similar Fritzing parts, or you already started work, please link it here.

**Top view​❗**  
\<This picture shows the part from above, so that is easy to see were connectors should go, and which diameter they have.\>

Copy and paste a foto or vector graphic. _No links here, otherwise your post might be flagged as spam._

**Datasheet​❗**  
The official documentation of the part manufacture is linked here:

Please add a link to PDF of the manufacturers datasheet. _Here, a link is fine._

**Footprint**  
E.g. SOT23-5 , TO-220.  
This usually does not apply to breakout boards.

**Type**  
 I did not read this  
 Breakout board, sub assembly, plug in module (A)  
 Antenna (AE)  
 Battery (BT)  
 Capacitor (C)  
 Diode (D)  
 Display (DS)  
 Fuse (F)  
 Hardware , mounting screws, etc. (H)  
 Jack, fixed part of a connector pair, header (J)  
 Relay (K)  
 Inductor, Coil, Ferrite bead (L)  
 Loudspeaker, Buzzer (LS)  
 Motor (M)  
 Microphone (MK)  
 Plug, moveable part of a connector pair (P)  
 Transistor (Q)  
 Resistor (R)  
 Thermistor (RT)  
 Varistor (RV)  
 Switch (S)  
 Transformer (T)  
 Integrated Circuit (IC)  
 Crystal, Oscillator (Y)  
 Zender diode (Z)  
 Other (please specifiy)
