# Howto create Custom part (pot) **URL:** \ **Category:** uncategorized\ **Created:** [December 12, 2019, 10:38am UTC](https://forum.fritzing.org/t/howto-create-custom-part-pot/7899 "2019-12-12T10:38:19Z")\ **Posts on this page:** 1\ **Showing post:** 2
**Author:** ![vanepp](https://forum.fritzing.org/user_avatar/forum.fritzing.org/vanepp/32/4426_2.png) [@vanepp](https://forum.fritzing.org/u/vanepp)\ **Post date:** [December 12, 2019, 4:45pm UTC](https://forum.fritzing.org/t/howto-create-custom-part-pot/7899/2 "2019-12-12T16:45:32Z")
Welcome to Fritzing! The first thing to do when you need a part is a google search of the form “fritzing part BOURNS 3266W” which in this case turns up > [@Bourns #3296 Square Trimpot 25 turn - 90º sharp bent legs with body lying flat for low profile](https://forum.fritzing.org/t/bourns-3296-square-trimpot-25-turn-90-sharp-bent-legs-with-body-lying-flat-for-low-profile/1281): > > UPDATED Bourns #3296 Square Trimpot 25 turn - 90º sharp bent legs with body lying flat for low profile [image] V1.1[Trimpot-#3296-flat.fzpz](https://forum.fritzing.org/uploads/default/original/1X/c705a7c3f897b928f2e026d8e39e1694fe337e56.fzpz) (7.6 KB) Added missing top copper - now suitable for 2 sided boards. Part has same id as the old so you have to manually delete the old one if it’s installed. [http://fritzing.org/forum/thread/297/](http://fritzing.org/forum/thread/297/) which is much easier than making a new part. If this part doesn’t suit, post the changes you need and I can make them to that part. In the case where there isn’t a part and you do need to make one here are some tutorials which apply to the current version of Fritzing (many of the tutorials out there are for older version of Fritzing and no longer apply): > [@A new part creation HowTo (long! So long it is in 2 posts)](http://forum.fritzing.org/t/a-new-part-creation-howto-long-so-long-it-is-in-2-posts/2238): > > (Edit: November 2016: This is an updated (and corrected) version of the original parts creation howto. This version corrects some suggestions (mostly saving Inkscape files as optimized svg which turns out to cause other problems) with the first version and expands the section on parts testing. While there doesn’t appear to be a lot of interest in this subject I’ll make at least this update so the information is as correct as I can get it.) This is a description of how I made the Valor PM6078-00… > [@Fritzing PART CREATION Video Tutorial Series](http://forum.fritzing.org/t/fritzing-part-creation-video-tutorial-series/2647/3): > > Fritzing Part Creation - Chapter3 - Inkscape Advanced Essentials Learning how to draw in Inkscape - more features. 0:00 Overview 0:16 Select object with cursor and XML Editor 3:34 Manipulate special PDF’s in Inkscape 4:33 XML Editor - Direct drawing manipulation 6:05 XML Editor - Making group, moving object, changing layer height 7:27 Cursor - Changing layer height 8:21 Ruler 9:07 Grids 9:28 Snap selection 10:16 Drawing origin > [@Part creation howto part 1 breadboard and pcb](https://forum.fritzing.org/t/part-creation-howto-part-1-breadboard-and-pcb/7692): > > Someone in this forum post requested help to fix up a part. So while doing that I decided to record what I needed to do in order to fix the part to provide a tutorial to create new / fix broken parts. If you start from the Tarjeta S4A EDU.fzpz file posted in the above thread, you should be able to recreate my improved part posted in the same thread. I started by loading the original part in to Fritzing, that indicates breadboard is (at first look anyway) pretty good, but schematic and pcb are… parts making is currently poorly documented and quite complex (it took me around a year with constant help from folks in the forum to learn to make parts) so the usual method is try, then post your questions in here and one of us will help you out. Peter --- _[View the full topic](https://forum.fritzing.org/t/howto-create-custom-part-pot/7899)._