# How to add DHT11 and Adafruit GPS

**URL:** <https://forum.fritzing.org/t/how-to-add-dht11-and-adafruit-gps/6267>\
**Category:** parts help\
**Created:** [January 7, 2019, 11:32am UTC](https://forum.fritzing.org/t/how-to-add-dht11-and-adafruit-gps/6267 "2019-01-07T11:32:15Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![vanepp](https://forum.fritzing.org/user_avatar/forum.fritzing.org/vanepp/32/4426_2.png) [@vanepp](https://forum.fritzing.org/u/vanepp)\
**Post date:** [January 8, 2019, 4:28pm UTC](https://forum.fritzing.org/t/how-to-add-dht11-and-adafruit-gps/6267/4 "2019-01-08T16:28:39Z")

</div>

The advise in this forum post:

> [@How can add MQ-2 smoke detector picture in fritzing , please help me ! frowning](http://forum.fritzing.org/t/how-can-add-mq-2-smoke-detector-picture-in-fritzing-please-help-me/5331):
>
> Please help me with MQ-2

also applies here. A part that has the same pins will do to represent a part not present. For power there are two choices: the best one is to add a power source (a battery and regulator, a regulator with an external supply, although I don’t think there are external supply parts around) or just scroll down the core parts bin to schematic view and drag the V++ icon in to the drawing. The disadvantage to this is that it only provides a schematic symbol for power, it doesn’t actually provide power to the circuit (you have to remember to do that in some way for it to work).

Peter

---

_[View the full topic](https://forum.fritzing.org/t/how-to-add-dht11-and-adafruit-gps/6267)._