# How can i find the esp32 like this? **URL:** \ **Category:** parts help\ **Created:** [June 8, 2024, 8:46am UTC](https://forum.fritzing.org/t/how-can-i-find-the-esp32-like-this/23865 "2024-06-08T08:46:53Z")\ **Posts on this page:** 1\ **Showing post:** 2
**Author:** ![vanepp](https://forum.fritzing.org/user_avatar/forum.fritzing.org/vanepp/32/4426_2.png) [@vanepp](https://forum.fritzing.org/u/vanepp)\ **Post date:** [June 8, 2024, 2:32pm UTC](https://forum.fritzing.org/t/how-can-i-find-the-esp32-like-this/23865/2 "2024-06-08T14:32:30Z")
By providing a web site where you got the image (so I don’t have to search for it) like this: > **[Hoy miles diy kit dtu, esp32 nrf24l01 kabel, echtzeit einsicht in pv module,...](https://de.aliexpress.com/i/1005006170682708.html?gatewayAdapt=glo2deu)** > > Smarter Shopping, Better Living! Aliexpress.com which allows me to identify which of the many ESP32 boards this is which leads to a part here: > [@Doit esp32 devkit v1](https://forum.fritzing.org/t/doit-esp32-devkit-v1/6158/8): > > OK here is an improved (but likely not a direct replacement) version of your part. Much of the change isn’t visible directly. Breadboard has been fully implemented so it now works correctly (that is probably the most visible change). All the svgs have been rescaled to standard scale, Schematic has been made smaller and to match the bb and pcb views. Pcb has a bunch of unneeded elements removed and the pads with holes set to 0.038in (suitable for .1 headers) and aligned to .1in pitch and 1.0 in w… use the DOIT Esp32 DevKit v1 improved.fzpz part because the original one has some problems. Peter --- _[View the full topic](https://forum.fritzing.org/t/how-can-i-find-the-esp32-like-this/23865)._