# How can I edit schematic image of already existing part? **URL:** \ **Category:** parts help\ **Created:** [February 26, 2022, 6:33am UTC](https://forum.fritzing.org/t/how-can-i-edit-schematic-image-of-already-existing-part/15281 "2022-02-26T06:33:45Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![sseaeagle](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/s/c5a1d2/32.png) [@sseaeagle](https://forum.fritzing.org/u/sseaeagle)\ **Post date:** [February 26, 2022, 6:33am UTC](https://forum.fritzing.org/t/how-can-i-edit-schematic-image-of-already-existing-part/15281/1 "2022-02-26T06:33:45Z")
Hello, I’m new to fritzing and want to make awesome device. but i’m now struggling with some frustration. fritzing is lack of some parts. if someone help me, i will upload the part made by me, and upload youtube video if i have time. question is : > **[Driving an ESC/Brushless-Motor Using Raspberry Pi](https://www.instructables.com/Driving-an-ESCBrushless-Motor-Using-Raspberry-Pi/)** > > Driving an ESC/Brushless-Motor Using Raspberry Pi : Hey there!!! In this instructable I will show you how to program an ESC and drive a brushless-motor in a desired speed using Raspberry Pi 3.I recommend you to READ THE WHOLE INSTRUCTABLE BEFORE... this is the 3S LIPO battery that i found on internet. i want to upload the image, but this forum have restriction on new user, so i can only put one image on my topic. I decided change text layer from “11.1V 3S LIPO BATTERY” to “22.2V 6S LIPO BATTERY” and change schematic image to 6 along battery(now 3 along battery) i opened svg image on the inkscape, and edited, result is like below : ![NEW 1](https://forum.fritzing.org/uploads/default/original/2X/e/e6bb0a223e94f983fd91470364dd77f4c9904574.png) I have no idea what size to match, what is the exterior line(thick line, maybe it is size of the model),how to extend exterior line and is there anything to do in inkscape before change connector location in fritzing part editor. someone can give the guide? ---
**Author:** ![vanepp](https://forum.fritzing.org/user_avatar/forum.fritzing.org/vanepp/32/4426_2.png) [@vanepp](https://forum.fritzing.org/u/vanepp)\ **Post date:** [February 26, 2022, 11:40pm UTC](https://forum.fritzing.org/t/how-can-i-edit-schematic-image-of-already-existing-part/15281/2 "2022-02-26T23:40:12Z")
In this case you don’t want to do this. Schematic is an abstract view and the current schematic is entirely fine as is. You may want to edit breadboard to change the voltage on the battery however. In the image, you look to have not done (in Inkscape) an “Edit-select all” followed by a “Edit-\>resize page to selection” to reset the view box which will result in the image being truncated when loaded in to Fritzing. These two tutorials apply to current versions of Fritzing and will give you the necessary information to make parts: > [@Fritzing PART CREATION Video Tutorial Series](http://forum.fritzing.org/t/fritzing-part-creation-video-tutorial-series/2647): > > NEW FASTER PART MAKING VIDEOS AT THE BOTTOM-[Fritzing Parts Fast](https://forum.fritzing.org/t/fritzing-part-creation-video-tutorial-series/2647/19) ADVANCED FRITZING USER TIPS & TRICKS VIDEOS AT THE BOTTOM-[Fritzing Adv Tips & Tricks](https://forum.fritzing.org/t/fritzing-part-creation-video-tutorial-series/2647/15) A series of part creation videos - I’m not an expert, but there was nothing else around at the time. Use 1080p HD fullscreen to see details clearly - use gear symbol bottom right -. Recorded slowly for older people, so select a higher speed if it’s too slow. P.S. - Sorry about the voice/sound yum Fritzing Part Creation - Chapter1 - New Part … > [@Part creation howto part 1 breadboard and pcb](https://forum.fritzing.org/t/part-creation-howto-part-1-breadboard-and-pcb/7692): > > Someone in this forum post requested help to fix up a part. So while doing that I decided to record what I needed to do in order to fix the part to provide a tutorial to create new / fix broken parts. If you start from the Tarjeta S4A EDU.fzpz file posted in the above thread, you should be able to recreate my improved part posted in the same thread. I started by loading the original part in to Fritzing, that indicates breadboard is (at first look anyway) pretty good, but schematic and pcb are… Peter ---
**Author:** ![sseaeagle](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/s/c5a1d2/32.png) [@sseaeagle](https://forum.fritzing.org/u/sseaeagle)\ **Post date:** [February 27, 2022, 8:27am UTC](https://forum.fritzing.org/t/how-can-i-edit-schematic-image-of-already-existing-part/15281/3 "2022-02-27T08:27:07Z")
Thank you for your reply. I submit my part edited. this is 6S Li-Po battery which is used widely in drone, Remote control things world. if something is not good, please let me know to revise my model [LIPO-22.2V-6 Cells.fzpz](https://forum.fritzing.org/uploads/short-url/o2BifCsb5vITyP3XEtkiJze7wYr.fzpz) (14.9 KB) this is originally by below link : > **[Driving an ESC/Brushless-Motor Using Raspberry Pi](https://www.instructables.com/Driving-an-ESCBrushless-Motor-Using-Raspberry-Pi/)** > > Driving an ESC/Brushless-Motor Using Raspberry Pi : Hey there!!! In this instructable I will show you how to program an ESC and drive a brushless-motor in a desired speed using Raspberry Pi 3.I recommend you to READ THE WHOLE INSTRUCTABLE BEFORE... I just edited his making. ---
**Author:** ![sseaeagle](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/s/c5a1d2/32.png) [@sseaeagle](https://forum.fritzing.org/u/sseaeagle)\ **Post date:** [February 27, 2022, 8:50am UTC](https://forum.fritzing.org/t/how-can-i-edit-schematic-image-of-already-existing-part/15281/4 "2022-02-27T08:50:11Z")
problem has occured with my new part model : ![EDITED](https://forum.fritzing.org/uploads/default/original/2X/c/cac6987025ed8c389f8fcbaa3e27d2bb96bf7f22.jpeg) in part viewer i can see connector position is correct as the photo, but when i engaged to working i found out connector position is invalid : ![EDIT2](https://forum.fritzing.org/uploads/default/original/2X/8/8befe889853074ffac32850bf78b6d8153eff401.png) is there something I have to do for moving connector position…? ---
**Author:** ![vanepp](https://forum.fritzing.org/user_avatar/forum.fritzing.org/vanepp/32/4426_2.png) [@vanepp](https://forum.fritzing.org/u/vanepp)\ **Post date:** [February 27, 2022, 3:36pm UTC](https://forum.fritzing.org/t/how-can-i-edit-schematic-image-of-already-existing-part/15281/5 "2022-02-27T15:36:39Z")
The terminalId in the schematic svg is in the wrong place. ![capture](https://forum.fritzing.org/uploads/default/original/2X/9/9d556fff7e518792a0f21d0decf3083058cb1764.jpeg) It needs to be on the end of the pin like this ![capture1](https://forum.fritzing.org/uploads/default/original/2X/e/e1e655ba22f5597b84a0b2e74ab453ef93481598.jpeg) Peter ---
**Author:** ![sseaeagle](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/s/c5a1d2/32.png) [@sseaeagle](https://forum.fritzing.org/u/sseaeagle)\ **Post date:** [February 28, 2022, 6:27am UTC](https://forum.fritzing.org/t/how-can-i-edit-schematic-image-of-already-existing-part/15281/6 "2022-02-28T06:27:21Z")
I submit/upload final version of my part file. I tested it by myself. LIPO 6S / 6cells/6 cell/22.2v/lithium polymer/fritzing part : [LIPO-22.2V-6 Cells.fzpz](https://forum.fritzing.org/uploads/short-url/a1BUu4K0N4Uj91XbEymWh4vBmO.fzpz) (15.0 KB)