# Has anyone made board Romeo from DFRobot? **URL:** \ **Category:** parts help\ **Created:** [June 20, 2020, 1:53pm UTC](https://forum.fritzing.org/t/has-anyone-made-board-romeo-from-dfrobot/10124 "2020-06-20T13:53:55Z")\ **Posts on this page:** 1\ **Showing post:** 6
**Author:** ![Old\_Grey](https://forum.fritzing.org/user_avatar/forum.fritzing.org/old_grey/32/973_2.png) [@Old\_Grey](https://forum.fritzing.org/u/Old_Grey)\ **Post date:** [June 21, 2020, 12:46am UTC](https://forum.fritzing.org/t/has-anyone-made-board-romeo-from-dfrobot/10124/6 "2020-06-21T00:46:35Z")
I just looked at the svg’s, and they are rubbish. He just imported the BB svg into another part - this is usually how you make parts -, but never bothered doing the other views. Basically you would have to start with that BB svg, make the PCB svg, and SCH svg, import those svg’s into a part with FZ Editor, and assign pins. If you don’t need the other views, you just need to put the BB svg into a part and assign pins. It a fair amount of work, especially if you don’t know how, but maybe watch these tutorials and then decide if you want to tackle it or maybe wait and see if Vanepp can do it. > [@Fritzing PART CREATION Video Tutorial Series](https://forum.fritzing.org/t/fritzing-part-creation-video-tutorial-series/2647): > > NEW FASTER PART MAKING VIDEOS AT THE BOTTOM-[Fritzing Parts Fast](https://forum.fritzing.org/t/fritzing-part-creation-video-tutorial-series/2647/19) ADVANCED FRITZING USER TIPS & TRICKS VIDEOS AT THE BOTTOM-[Fritzing Adv Tips & Tricks](https://forum.fritzing.org/t/fritzing-part-creation-video-tutorial-series/2647/15) A series of part creation videos - I’m not an expert, but there was nothing else around at the time. Use 1080p HD fullscreen to see details clearly - use gear symbol bottom right -. Recorded slowly for older people, so select a higher speed if it’s too slow. P.S. - Sorry about the voice/sound yum Fritzing Part Creation - Chapter1 - New Part … Vanepp did a text guide, but I can’t find it so you will have to look for it. --- _[View the full topic](https://forum.fritzing.org/t/has-anyone-made-board-romeo-from-dfrobot/10124)._