# Grouping objects in PCB view **URL:** \ **Category:** wishlist\ **Created:** [September 17, 2023, 1:33am UTC](https://forum.fritzing.org/t/grouping-objects-in-pcb-view/20546 "2023-09-17T01:33:46Z")\ **Posts on this page:** 1\ **Showing post:** 2
**Author:** ![vanepp](https://forum.fritzing.org/user_avatar/forum.fritzing.org/vanepp/32/4426_2.png) [@vanepp](https://forum.fritzing.org/u/vanepp)\ **Post date:** [September 17, 2023, 1:39am UTC](https://forum.fritzing.org/t/grouping-objects-in-pcb-view/20546/2 "2023-09-17T01:39:43Z")
Your best bet would probably be to use the Nokia 5110 part available here: > [@Nokia 5110 LCD display](https://forum.fritzing.org/t/nokia-5110-lcd-display/2416): > > An improved version of the Nokia 5110 LCD display module originally by Rafa G. The breadboard view is awesome, but there was no schematic and no outline on the PCB view. There is also another part in the projects area, but it turns out the breadboard view is a png file and thus not editable. On this version all 3 views are present (breadboard, schematic, and PCB) with PCB having both the outline and the position of the mounting holes on the silkscreen (and the hole size set to .038in to accept … I don’t remember if the mounting holes are in the part (likely they are on silkscreen and you have to drag a hole over them if you want it drilled.) An alternative would be to make a new part with the holes drilled. That should do what you need as the holes will move with the part. edit: I had a look at the listed parts and neither my original or the modified blue one are correct. If you would like a part with the mounting holes drilled please upload your sketch (or the size of the 4 holes and their positioning relative to the header) and I can make a corrected part for you. Peter --- _[View the full topic](https://forum.fritzing.org/t/grouping-objects-in-pcb-view/20546)._