# FPC connector part

**URL:** <https://forum.fritzing.org/t/fpc-connector-part/33096>\
**Category:** parts help\
**Created:** [October 6, 2025, 6:22pm UTC](https://forum.fritzing.org/t/fpc-connector-part/33096 "2025-10-06T18:22:22Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![vanepp](https://forum.fritzing.org/user_avatar/forum.fritzing.org/vanepp/32/4426_2.png) [@vanepp](https://forum.fritzing.org/u/vanepp)\
**Post date:** [October 6, 2025, 6:39pm UTC](https://forum.fritzing.org/t/fpc-connector-part/33096/2 "2025-10-06T18:39:03Z")

</div>

Not enough information here to do anything with. If you want just the connector, there is an odd pitch 12 pin fpc connector in this post (and it looks like the breakout board may be available in the Adafruit repository)

> [@12 pin FPC 0.7mm Pitch Footprint?](https://forum.fritzing.org/t/12-pin-fpc-0-7mm-pitch-footprint/17790):
>
> Its a rare footprint and I need some help making it. Or if someone has one that they made or found in the past that would be nice. I think this can easily be done with a custom part made off of the Header object in Core Parts. But I can not specify an exact distance between the pins.

If that isn’t what you want (and it probably isn’t as it is 0.7mm pitch not 0.5mm) then you need to specify if you want the breakout board to 0.1in pins (which is easiest) or the SMD connector which would require a data sheet with pcb layout footprint to make. Digikey or mouser likely have connector data sheets (a 12 pin 0.5mm pitch connector should be fairly standard.)

Peter

---

_[View the full topic](https://forum.fritzing.org/t/fpc-connector-part/33096)._