# ESP32-CAM Fritzing Part **URL:** \ **Category:** parts help\ **Created:** [February 16, 2020, 12:13am UTC](https://forum.fritzing.org/t/esp32-cam-fritzing-part/8517 "2020-02-16T00:13:25Z")\ **Posts on this page:** 9\ **Page:** 1
**Author:** ![bigc7](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/b/e36b37/32.png) [@bigc7](https://forum.fritzing.org/u/bigc7)\ **Post date:** [February 16, 2020, 12:13am UTC](https://forum.fritzing.org/t/esp32-cam-fritzing-part/8517/1 "2020-02-16T00:13:25Z")
Does anyone happen to have the ESP32-CAM part handy? I’ve looked for it but can’t seem to track it down. ---
**Author:** ![vanepp](https://forum.fritzing.org/user_avatar/forum.fritzing.org/vanepp/32/4426_2.png) [@vanepp](https://forum.fritzing.org/u/vanepp)\ **Post date:** [February 16, 2020, 2:05am UTC](https://forum.fritzing.org/t/esp32-cam-fritzing-part/8517/2 "2020-02-16T02:05:22Z")
There doesn’t seem to be one. You would need to provide a pointer to the one you want, as there appear to be 6 or 7 different development boards plus the board alone from [espressif.com](http://espressif.com). Peter ---
**Author:** ![bigc7](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/b/e36b37/32.png) [@bigc7](https://forum.fritzing.org/u/bigc7)\ **Post date:** [February 21, 2020, 3:03am UTC](https://forum.fritzing.org/t/esp32-cam-fritzing-part/8517/3 "2020-02-21T03:03:50Z")
I actually found the one I was looking for. It was the AI Thinker Module. I’ve attached the fzpz below. [ESP32-CAM\_FRONT.fzpz](https://forum.fritzing.org/uploads/short-url/4nzOedgFMsuKCNcTT1PmqCNBCmv.fzpz) (63.8 KB) ---
**Author:** ![vanepp](https://forum.fritzing.org/user_avatar/forum.fritzing.org/vanepp/32/4426_2.png) [@vanepp](https://forum.fritzing.org/u/vanepp)\ **Post date:** [February 21, 2020, 3:08am UTC](https://forum.fritzing.org/t/esp32-cam-fritzing-part/8517/4 "2020-02-21T03:08:35Z")
Its good you found one, I would be interested in the search term you used to find it if you don’t mind sharing (better/different ways to search are always welcome 🙂 .) The part however is broken in schematic and pcb (the red squares indicate undefined connectors.) I’ll try and fix it up in to a proper part and post it. Peter ---
**Author:** ![bigc7](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/b/e36b37/32.png) [@bigc7](https://forum.fritzing.org/u/bigc7)\ **Post date:** [February 21, 2020, 3:37am UTC](https://forum.fritzing.org/t/esp32-cam-fritzing-part/8517/5 "2020-02-21T03:37:03Z")
Ahh I didn’t realize that it was broken. When I used it I did so only for the diagram, so I didn’t notice. As per the search, I actually got it from a professor at my school. He happened to have it handy, so unfortunately I can’t describe exactly how he found it. ---
**Author:** ![vanepp](https://forum.fritzing.org/user_avatar/forum.fritzing.org/vanepp/32/4426_2.png) [@vanepp](https://forum.fritzing.org/u/vanepp)\ **Post date:** [February 21, 2020, 5:20am UTC](https://forum.fritzing.org/t/esp32-cam-fritzing-part/8517/6 "2020-02-21T05:20:37Z")
While you probably don’t need it, here is a complete part for anyone else that does … [ESP32-CAM\_FRONT-fixed.fzpz](https://forum.fritzing.org/uploads/short-url/xUGOUf9WPiDJzuEdj1sCo2Y33aD.fzpz) (59.7 KB) Peter ---
**Author:** ![Strepser](https://forum.fritzing.org/user_avatar/forum.fritzing.org/strepser/32/14533_2.png) [@Strepser](https://forum.fritzing.org/u/Strepser)\ **Post date:** [August 13, 2023, 8:57pm UTC](https://forum.fritzing.org/t/esp32-cam-fritzing-part/8517/7 "2023-08-13T20:57:44Z")
thank u , the pinout is correct in this version ---
**Author:** ![Strepser](https://forum.fritzing.org/user_avatar/forum.fritzing.org/strepser/32/14533_2.png) [@Strepser](https://forum.fritzing.org/u/Strepser)\ **Post date:** [August 13, 2023, 8:58pm UTC](https://forum.fritzing.org/t/esp32-cam-fritzing-part/8517/8 "2023-08-13T20:58:11Z")
thank u , the pinout is correct in this version ---
**Author:** ![jorgechacblogspot](https://forum.fritzing.org/user_avatar/forum.fritzing.org/jorgechacblogspot/32/7659_2.png) [@jorgechacblogspot](https://forum.fritzing.org/u/jorgechacblogspot)\ **Post date:** [August 15, 2023, 6:52pm UTC](https://forum.fritzing.org/t/esp32-cam-fritzing-part/8517/9 "2023-08-15T18:52:04Z")
![ESP32CAM](https://forum.fritzing.org/uploads/default/original/3X/2/a/2aff1106315ba4ccbad590c6fae7b34bfda1979e.png)