# Editing - Lora UART module E220 from Ebyte

**URL:** <https://forum.fritzing.org/t/editing-lora-uart-module-e220-from-ebyte/21470>\
**Category:** parts help\
**Created:** [December 3, 2023, 9:07am UTC](https://forum.fritzing.org/t/editing-lora-uart-module-e220-from-ebyte/21470 "2023-12-03T09:07:52Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Poiuz](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/p/ba9def/32.png) [@Poiuz](https://forum.fritzing.org/u/Poiuz)\
**Post date:** [December 3, 2023, 9:07am UTC](https://forum.fritzing.org/t/editing-lora-uart-module-e220-from-ebyte/21470/1 "2023-12-03T09:07:52Z")

</div>

So I go myself a bunch of Lora modules from Ebyte such as :

- E220-900T22D
- E32-900T20D

I found the part that Peter did a while ago here [How to add osoyoo LoRa Module - projects - fritzing forum](https://forum.fritzing.org/t/how-to-add-osoyoo-lora-module/7907)

And was thinking to simply change the text by editing the part however I canʼt seem to figure how to edit each text section. The sections are selectable so I must not be awaken enough…

 ![Text on part edit Fritzing](https://forum.fritzing.org/uploads/default/original/3X/f/1/f1196da72b44b39b71781b1be565455750b2a9d9.png)

As I understood, there is no point in looking at datasheets for diferences between modules right? The pins are the same and simulation only work for leds ? (no RX/TX or other connections debbug?)

Just wondering if there is a point to create another variant of the same module exept for the text on it.

---

<div class="post-metadata">

**Author:** ![vanepp](https://forum.fritzing.org/user_avatar/forum.fritzing.org/vanepp/32/4426_2.png) [@vanepp](https://forum.fritzing.org/u/vanepp)\
**Post date:** [December 3, 2023, 3:54pm UTC](https://forum.fritzing.org/t/editing-lora-uart-module-e220-from-ebyte/21470/2 "2023-12-03T15:54:31Z")

</div>

You can’t edit the svg from the parts editor you need to use a svg editor such as Inkscape to change the svg. Instructions are available in this tutorial:

> [@Part creation howto part 1 breadboard and pcb](https://forum.fritzing.org/t/part-creation-howto-part-1-breadboard-and-pcb/7692):
>
> Someone in this forum post requested help to fix up a part. So while doing that I decided to record what I needed to do in order to fix the part to provide a tutorial to create new / fix broken parts. If you start from the Tarjeta S4A EDU.fzpz file posted in the above thread, you should be able to recreate my improved part posted in the same thread. I started by loading the original part in to Fritzing, that indicates breadboard is (at first look anyway) pretty good, but schematic and pcb are…

Peter