# DRV8833 with cooling pad

**URL:** <https://forum.fritzing.org/t/drv8833-with-cooling-pad/33839>\
**Category:** parts help\
**Created:** [February 27, 2026, 10:07am UTC](https://forum.fritzing.org/t/drv8833-with-cooling-pad/33839 "2026-02-27T10:07:15Z")\
**Posts on this page:** 10\
**Page:** 1

<div class="post-metadata">

**Author:** ![real-bombinho](https://forum.fritzing.org/user_avatar/forum.fritzing.org/real-bombinho/32/15757_2.png) [@real-bombinho](https://forum.fritzing.org/u/real-bombinho)\
**Post date:** [February 27, 2026, 10:07am UTC](https://forum.fritzing.org/t/drv8833-with-cooling-pad/33839/1 "2026-02-27T10:07:15Z")

</div>

I was looking at the DRV8833 IC (not a board), it is a TSSOP16.

I could not find a Fritzing part for the DRV8833 hence I grabbed the first TSSOP16 part I could find and had a go at modifying the PCB part.

 ![image](https://forum.fritzing.org/uploads/default/original/3X/b/c/bc8e89db6a2399ee437f4e1c43f1a6bbd39c4c95.png)

> **[DRV8833 PDF](https://www.alldatasheet.com/datasheet-pdf/view/2192397/TI2/DRV8833.html)**
>
> Part #: DRV8833. Description: DRV8833 Dual H-Bridge Motor Driver. File Size: 955.43 Kbytes. Manufacturer: Texas Instruments.

This is what I came up with so far:

![svg.pcb.drv8833-tssop_1_pcb](https://forum.fritzing.org/uploads/default/original/3X/0/7/0709974ff9ab5640304c3778095780d73f4392c7.svg)

My issue is that only a part of the copper is supposed to be exposed and I have no idea how to do this, also the cooling pad should be both sides, can this be realised?

Maybe like this?

```auto
<g id="copper1" stroke-linecap="round" stroke-width="0">
  <rect id="connector0pad" x=".114" y="5.8" width=".45" height="1.5" fill="#F7BD13" connectorname="1"/>
  <rect id="connector1pad" x=".764" y="5.8" width=".45" height="1.5" fill="#F7BD13" connectorname="2"/>
  <rect id="connector2pad" x="1.41" y="5.8" width=".45" height="1.5" fill="#F7BD13" connectorname="3"/>
  <rect id="connector3pad" x="2.06" y="5.8" width=".45" height="1.5" fill="#F7BD13" connectorname="4"/>
  <rect id="connector4pad" x="2.71" y="5.8" width=".45" height="1.5" fill="#F7BD13" connectorname="5"/>
  <rect id="connector5pad" x="3.36" y="5.8" width=".45" height="1.5" fill="#F7BD13" connectorname="6"/>
  <rect id="connector6pad" x="4.01" y="5.8" width=".45" height="1.5" fill="#F7BD13" connectorname="7"/>
  <rect id="connector7pad" x="4.66" y="5.8" width=".4" height="1.5" fill="#F7BD13" connectorname="8"/>
  <rect id="connector8pad" x="4.66" width=".45" height="1.5" fill="#F7BD13" connectorname="9"/>
  <rect id="connector9pad" x="4.01" width=".45" height="1.5" fill="#F7BD13" connectorname="10"/>
  <rect id="connector10pad" x="3.36" width=".45" height="1.5" fill="#F7BD13" connectorname="11"/>
  <rect id="connector11pad" x="2.71" width=".45" height="1.5" fill="#F7BD13" connectorname="12"/>
  <rect id="connector12pad" x="2.06" width=".45" height="1.5" fill="#F7BD13" connectorname="13"/>
  <rect id="connector13pad" x="1.41" width=".45" height="1.5" fill="#F7BD13" connectorname="14"/>
  <rect id="connector14pad" x=".764" width=".45" height="1.5" fill="#F7BD13" connectorname="15"/>
  <rect id="connector15pad" x=".114" width=".45" height="1.5" fill="#F7BD13" connectorname="16"/>
  <rect id="connectorHeatPadT" x=".114" y="1.9" width="5" height="3.4" fill="#f7bd13" connectorname="17"/>
  <g id="copper0"> 
    <rect id="connectorHeatPadB" x=".114" y="1.9" width="5" height="3.4" fill="#f7bd13" connectorname="17"/>
  </g>
 </g>

```

I had a look how the ATMEGA1284 realises the vias and tried to copy the concept. But I could not see a bottom pad.

**Footprint**  
TSSOP16 with cooling pad

**Type**  
 I did not read this  
 Breakout board, sub assembly, plug in module (A)  
 Antenna (AE)  
 Battery (BT)  
 Capacitor (C)  
 Diode (D)  
 Display (DS)  
 Fuse (F)  
 Hardware , mounting screws, etc. (H)  
 Jack, fixed part of a connector pair, header (J)  
 Relay (K)  
 Inductor, Coil, Ferrite bead (L)  
 Loudspeaker, Buzzer (LS)  
 Motor (M)  
 Microphone (MK)  
 Plug, moveable part of a connector pair (P)  
 Transistor (Q)  
 Resistor (R)  
 Thermistor (RT)  
 Varistor (RV)  
 Switch (S)  
 Transformer (T)  
 Integrated Circuit (IC)  
 Crystal, Oscillator (Y)  
 Zener diode (Z)  
 Other (please specifiy)

---

<div class="post-metadata">

**Author:** ![real-bombinho](https://forum.fritzing.org/user_avatar/forum.fritzing.org/real-bombinho/32/15757_2.png) [@real-bombinho](https://forum.fritzing.org/u/real-bombinho)\
**Post date:** [February 28, 2026, 3:55pm UTC](https://forum.fritzing.org/t/drv8833-with-cooling-pad/33839/2 "2026-02-28T15:55:32Z")

</div>

@KjellM Has Fritzing the ability to have solder mask covered copper in parts?

---

<div class="post-metadata">

**Author:** ![RAPTOR7762](https://forum.fritzing.org/user_avatar/forum.fritzing.org/raptor7762/32/22620_2.png) [@RAPTOR7762](https://forum.fritzing.org/u/RAPTOR7762)\
**Post date:** [February 28, 2026, 3:56pm UTC](https://forum.fritzing.org/t/drv8833-with-cooling-pad/33839/3 "2026-02-28T15:56:39Z")

</div>

sorry i’m no expert, but can you attatch a screenshot? Maybe can undrstand better

---

<div class="post-metadata">

**Author:** ![real-bombinho](https://forum.fritzing.org/user_avatar/forum.fritzing.org/real-bombinho/32/15757_2.png) [@real-bombinho](https://forum.fritzing.org/u/real-bombinho)\
**Post date:** [February 28, 2026, 4:04pm UTC](https://forum.fritzing.org/t/drv8833-with-cooling-pad/33839/4 "2026-02-28T16:04:57Z")

</div>

Hi RAPTOR7762,

my apologies I am not entirely sure which screen I am supposed to provide.

This is the best picture I could find on the quick:

 ![image](https://forum.fritzing.org/uploads/default/original/3X/a/d/adf41b7fa075d0b962ddbd774d2f54d01e8b41e6.jpeg)

The solder area is relatively small but as per picture above the manufacturer recommendation is to make a large heat pad with vias but cover it with solder mask except of the area that can be soldered.

---

<div class="post-metadata">

**Author:** ![RAPTOR7762](https://forum.fritzing.org/user_avatar/forum.fritzing.org/raptor7762/32/22620_2.png) [@RAPTOR7762](https://forum.fritzing.org/u/RAPTOR7762)\
**Post date:** [February 28, 2026, 4:08pm UTC](https://forum.fritzing.org/t/drv8833-with-cooling-pad/33839/5 "2026-02-28T16:08:00Z")

</div>

Ok @real-bombinho I’ll spend some time digging my brains and the web 🙂

---

<div class="post-metadata">

**Author:** ![real-bombinho](https://forum.fritzing.org/user_avatar/forum.fritzing.org/real-bombinho/32/15757_2.png) [@real-bombinho](https://forum.fritzing.org/u/real-bombinho)\
**Post date:** [February 28, 2026, 4:11pm UTC](https://forum.fritzing.org/t/drv8833-with-cooling-pad/33839/6 "2026-02-28T16:11:13Z")

</div>

Thank you, I have found heat pads with vias (e.g. the above mentioned ATMEGA1284) but nothing indicating if Fritzing parts can have a solder mask layer.

Also the ATMEGA1284 puzzled me as it seems to have the vias but no bottom pad.

---

<div class="post-metadata">

**Author:** ![real-bombinho](https://forum.fritzing.org/user_avatar/forum.fritzing.org/real-bombinho/32/15757_2.png) [@real-bombinho](https://forum.fritzing.org/u/real-bombinho)\
**Post date:** [March 1, 2026, 1:37pm UTC](https://forum.fritzing.org/t/drv8833-with-cooling-pad/33839/7 "2026-03-01T13:37:10Z")

</div>

I just modified the schematic file to match

![DRV8833-tssop_a44152e62566974db8b1ea67e520b323_1_schematic](https://forum.fritzing.org/uploads/default/original/3X/6/7/67e2ac5d9576bf8eb09ef515a74963c202fe6544.svg)

---

<div class="post-metadata">

**Author:** ![KjellM](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/k/a3d4f5/32.png) [@KjellM](https://forum.fritzing.org/u/KjellM)\
**Post date:** [March 7, 2026, 9:30am UTC](https://forum.fritzing.org/t/drv8833-with-cooling-pad/33839/8 "2026-03-07T09:30:12Z")

</div>

Ideally Fritzing would allow a to directly protect copper, but currently this is not supported.

One possible workaround would be to manually remove the it from the gerber file.  
This is manual and error prone, it will be easy to forget this step when perparing the sketch for the Fab.

The maskTop is a negative of the mask, so the rectangle (an outline of it) will be an object in the file.

Load in gerbv, select the mask layer:

 ![image](https://forum.fritzing.org/uploads/default/original/3X/c/6/c6c4080abe665b98c501b0c5f9635aa5b3f32042.png)

Select the mask negative we want to remove, click it:

 ![image](https://forum.fritzing.org/uploads/default/original/3X/8/1/81330c20d80af00299e339ef5031091dcfed7921.png)

Right click for the menu:

 ![image](https://forum.fritzing.org/uploads/default/original/3X/5/7/5789bbfa12ba4320416c281348a346d2ec7ffdb2.png)

Remove it:

 ![image](https://forum.fritzing.org/uploads/default/original/3X/b/d/bdc07734054d5ee4232a468d04909c169da02ef9.png)

For better visualization, you can invert the mask.  
End result:

 ![image](https://forum.fritzing.org/uploads/default/original/3X/9/7/979703df6849f9e06fde80fbd60f2ff875445587.png)

I think adding support for soldermask0 and soldermask1 in parts should not be too difficult, so I have added it to our backlog.

---

<div class="post-metadata">

**Author:** ![real-bombinho](https://forum.fritzing.org/user_avatar/forum.fritzing.org/real-bombinho/32/15757_2.png) [@real-bombinho](https://forum.fritzing.org/u/real-bombinho)\
**Post date:** [March 7, 2026, 1:17pm UTC](https://forum.fritzing.org/t/drv8833-with-cooling-pad/33839/9 "2026-03-07T13:17:26Z")

</div>

Hi @KjellM,

thank you for your answer

IMHO the desired result would have been more like

 ![image](https://forum.fritzing.org/uploads/default/original/3X/8/d/8d78a360da773b9fe99b9bb7612bce1dc90c5b8d.png)

Yes, I think, adding solder mask to parts may become more and more important.

Parts are getting smaller and solder mask as protection as well as cooling pads have become a frequent occurrence for me now (and that is me mostly working with devices long out of support).

---

<div class="post-metadata">

**Author:** ![real-bombinho](https://forum.fritzing.org/user_avatar/forum.fritzing.org/real-bombinho/32/15757_2.png) [@real-bombinho](https://forum.fritzing.org/u/real-bombinho)\
**Post date:** [March 9, 2026, 11:16am UTC](https://forum.fritzing.org/t/drv8833-with-cooling-pad/33839/10 "2026-03-09T11:16:05Z")

</div>

I have been experimenting and so far I get Fritzing to actually display the heat pad front and bottom + vias from the part. Unfortunately uploading at Aisler does remove the pad from the underside and the vias are not recognised.

Currently adding vias manually and connecting them to ground is the only workaround I have found so far.

Due to the tight spacing this is not a fun process.
