Dip 10 switch help

parts help
1

Name of the part
DIP SW 10

Previous work, similar parts
DIP-8 is in the parts list. I found a DIP-12 in the forum.
Starting with DIP-12, I have been able to update the breadboard, icon, and schematic, but I am unable to create a proper PCB image with Inkscape.

Breadboard view

dip-sw-10_1_breadboard

Type
I did not read this
Breakout board, sub assembly, plug in module (A)
Antenna (AE)
Battery (BT)
Capacitor (C)
Diode (D)
Display (DS)
Fuse (F)
Hardware , mounting screws, etc. (H)
Jack, fixed part of a connector pair, header (J)
Relay (K)
Inductor, Coil, Ferrite bead (L)
Loudspeaker, Buzzer (LS)
Motor (M)
Microphone (MK)
Plug, moveable part of a connector pair (P)
Transistor (Q)
Resistor (R)
Thermistor (RT)
Varistor (RV)
Switch (S)
Transformer (T)
Integrated Circuit (IC)
Crystal, Oscillator (Y)
Zender diode (Z)
Other (please specifiy)
Dip format switch bank with 10 switches

2

Upload the .fzpz file for your part and I will fix pcb up (upload is 7th icon from the left in the reply menu.)

edit:

Even easier would be to replace the pcb svg with one from a 10 pin dip socket as they will be the same.

Peter

3

I’ve searched every way I can think of:
DIP 10, DIP 20, DIP SOCKET, SOCKET 10/20
Nothing useful comes up.

4

Found the generic IC with 20 pins. Seems to work so far.

5

It should the footprint will have the same definition (with all the correct groups defined) and just drop right in.

Peter

1 Like