# Diagram motor Pololu - 131:1 Metal Gearmotor 37Dx73L mm 24V with 64 CPR Encoder

**URL:** <https://forum.fritzing.org/t/diagram-motor-pololu-131-1-metal-gearmotor-37dx73l-mm-24v-with-64-cpr-encoder/22348>\
**Category:** beginners\
**Created:** [February 6, 2024, 7:55pm UTC](https://forum.fritzing.org/t/diagram-motor-pololu-131-1-metal-gearmotor-37dx73l-mm-24v-with-64-cpr-encoder/22348 "2024-02-06T19:55:22Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![timvanderpas](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/t/7c8e57/32.png) [@timvanderpas](https://forum.fritzing.org/u/timvanderpas)\
**Post date:** [February 6, 2024, 7:55pm UTC](https://forum.fritzing.org/t/diagram-motor-pololu-131-1-metal-gearmotor-37dx73l-mm-24v-with-64-cpr-encoder/22348/1 "2024-02-06T19:55:23Z")

</div>

Hello does anyone has a diagramp for the following motor [Pololu - 131:1 Metal Gearmotor 37Dx73L mm 24V with 64 CPR Encoder (Helical Pinion)](https://www.pololu.com/product/4696/specs)?

kind regards,

Tim

---

<div class="post-metadata">

**Author:** ![vanepp](https://forum.fritzing.org/user_avatar/forum.fritzing.org/vanepp/32/4426_2.png) [@vanepp](https://forum.fritzing.org/u/vanepp)\
**Post date:** [February 7, 2024, 12:36am UTC](https://forum.fritzing.org/t/diagram-motor-pololu-131-1-metal-gearmotor-37dx73l-mm-24v-with-64-cpr-encoder/22348/2 "2024-02-07T00:36:57Z")

</div>

This part should do what you want.

[pololu-4696.fzpz](https://forum.fritzing.org/uploads/short-url/3KAaZdG31KjSuyTqDk3ZHmIeMuh.fzpz) (4.2 KB)

Peter