# DESPI-C02 — Good Display universal SPI e-paper adapter

**URL:** <https://forum.fritzing.org/t/despi-c02-good-display-universal-spi-e-paper-adapter/34472>\
**Category:** parts submit\
**Created:** [September 7, 2026, 12:48am UTC](https://forum.fritzing.org/t/despi-c02-good-display-universal-spi-e-paper-adapter/34472 "2026-09-07T00:48:49Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![melastmohican](https://forum.fritzing.org/user_avatar/forum.fritzing.org/melastmohican/32/28167_2.png) [@melastmohican](https://forum.fritzing.org/u/melastmohican)\
**Post date:** [September 7, 2026, 12:48am UTC](https://forum.fritzing.org/t/despi-c02-good-display-universal-spi-e-paper-adapter/34472/1 "2026-09-07T00:48:49Z")

</div>

Sharing a part for the Good Display DESPI-C02, a universal SPI adapter board used to drive their e-paper panels (24-pin FPC in, 8-pin header out). Couldn’t find it in the library, so I built it myself.  
Keeping expectations honest: this is a simple part, not a realistic or true-to-size one. All I needed was every pin broken out and labeled so I could draw wiring diagrams against a microcontroller, not a manufacturable footprint.

Pinout is taken straight from the manufacturer’s schematic: 3.3V, GND, SDI, SCLK, CS, D/C, RES, BUSY. Breadboard, schematic, and PCB views are all included, plus a variant with a small e-paper panel graphic already attached for cleaner wiring diagrams.

Both .fzpz files are here: [rust-rpico2-discovery/fritzing at main · melastmohican/rust-rpico2-discovery · GitHub](https://github.com/melastmohican/rust-rpico2-discovery/tree/main/fritzing)

Feedback welcome, first custom parts I’ve made.