# Custom Breadboard and Distrubution Strip 3M **URL:** \ **Category:** parts help\ **Created:** [January 12, 2022, 5:34pm UTC](https://forum.fritzing.org/t/custom-breadboard-and-distrubution-strip-3m/14904 "2022-01-12T17:34:42Z")\ **Posts on this page:** 1\ **Showing post:** 4
**Author:** ![vanepp](https://forum.fritzing.org/user_avatar/forum.fritzing.org/vanepp/32/4426_2.png) [@vanepp](https://forum.fritzing.org/u/vanepp)\ **Post date:** [January 12, 2022, 6:32pm UTC](https://forum.fritzing.org/t/custom-breadboard-and-distrubution-strip-3m/14904/4 "2022-01-12T18:32:25Z")
> [@MarcelKraemer](#): > > I am not familiar with building parts and breadboards so far. If someone could provide me a link for > a tutorial “How to build a fritzing breadboard”…I would try it There is a tutorial for making parts, but it doesn’t currently include breadboards (which are a special case for a variety of reasons) because not many people need to do it. > [@Part creation howto part 1 breadboard and pcb](https://forum.fritzing.org/t/part-creation-howto-part-1-breadboard-and-pcb/7692): > > Someone in this forum post requested help to fix up a part. So while doing that I decided to record what I needed to do in order to fix the part to provide a tutorial to create new / fix broken parts. If you start from the Tarjeta S4A EDU.fzpz file posted in the above thread, you should be able to recreate my improved part posted in the same thread. I started by loading the original part in to Fritzing, that indicates breadboard is (at first look anyway) pretty good, but schematic and pcb are… The breadboard looks to be a standard full+ breadboard but with somewhat different power rails (the two isolated 5 pin sections in the middle). The distribution strip is pretty standard (I made a shorter one for someone.) I’ll have a poke at making the two necessary parts as I have built breadboards before and post them in a while. Peter --- _[View the full topic](https://forum.fritzing.org/t/custom-breadboard-and-distrubution-strip-3m/14904)._