# Creating a simple part

**URL:** <https://forum.fritzing.org/t/creating-a-simple-part/10595>\
**Category:** parts help\
**Created:** [August 12, 2020, 6:48am UTC](https://forum.fritzing.org/t/creating-a-simple-part/10595 "2020-08-12T06:48:59Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![Old\_Grey](https://forum.fritzing.org/user_avatar/forum.fritzing.org/old_grey/32/973_2.png) [@Old\_Grey](https://forum.fritzing.org/u/Old_Grey)\
**Post date:** [August 12, 2020, 7:00am UTC](https://forum.fritzing.org/t/creating-a-simple-part/10595/2 "2020-08-12T07:00:48Z")

</div>

You could just grab a PCB that size and put parts on it at their correct locations and it will be that part.

Do you want all views, or just one of the views in detailed. That is not going to be that easy if you want BB view - PCB view will be easier, but it’s still a weird shape -. Basically can you do a vector drawing of that PCB shape.

> [@Fritzing PART CREATION Video Tutorial Series](https://forum.fritzing.org/t/fritzing-part-creation-video-tutorial-series/2647):
>
> NEW FASTER PART MAKING VIDEOS AT THE BOTTOM-[Fritzing Parts Fast](https://forum.fritzing.org/t/fritzing-part-creation-video-tutorial-series/2647/19) ADVANCED FRITZING USER TIPS & TRICKS VIDEOS AT THE BOTTOM-[Fritzing Adv Tips & Tricks](https://forum.fritzing.org/t/fritzing-part-creation-video-tutorial-series/2647/15) A series of part creation videos - I’m not an expert, but there was nothing else around at the time. Use 1080p HD fullscreen to see details clearly - use gear symbol bottom right -. Recorded slowly for older people, so select a higher speed if it’s too slow. P.S. - Sorry about the voice/sound yum Fritzing Part Creation - Chapter1 - New Part …

The curx of parts is that you draw a svg of the part, then on the top layer you add pins. Grouping is another story, ie, BB and SCH has 1 group, but PCB has special groups.

---

_[View the full topic](https://forum.fritzing.org/t/creating-a-simple-part/10595)._