# Create schematic component problem pinout **URL:** \ **Category:** beginners\ **Created:** [July 19, 2022, 4:45pm UTC](https://forum.fritzing.org/t/create-schematic-component-problem-pinout/16599 "2022-07-19T16:45:16Z")\ **Posts on this page:** 9\ **Page:** 1
**Author:** ![calagan57](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/c/ce73a5/32.png) [@calagan57](https://forum.fritzing.org/u/calagan57)\ **Post date:** [July 19, 2022, 4:45pm UTC](https://forum.fritzing.org/t/create-schematic-component-problem-pinout/16599/1 "2022-07-19T16:45:16Z")
Hello! First sorry for my bad english. I created a component for my AS5600 project. On breadboard windows, it’s ok (pinout are correct) [![](https://rehost.diberie.com/Picture/Get/r/79651)](https://rehost.diberie.com/Picture/Get/f/79651) But when i’m trying to create “shematic” it doesn’t work correctly… no way to have the 7 pins assigned despite having named the “object properties” in inkscape… 🫤 This is the link of [schematic.svg](https://www.transfernow.net/dl/202207198BLjBL2E) Can you help me please? Thank you! Jean-Christophe ---
**Author:** ![vanepp](https://forum.fritzing.org/user_avatar/forum.fritzing.org/vanepp/32/4426_2.png) [@vanepp](https://forum.fritzing.org/u/vanepp)\ **Post date:** [July 19, 2022, 5:11pm UTC](https://forum.fritzing.org/t/create-schematic-component-problem-pinout/16599/2 "2022-07-19T17:11:54Z")
Your schematic should look like this (the pin numbers may be wrong here though) ![schematics-fixed](https://forum.fritzing.org/uploads/default/original/2X/3/30949b6021c9dc288c4272b50868ff345a596dee.svg) right click on the image above and select “Save image as” to download the actual svg. Typically the resistors and capacitors are not shown in schematic just the pins for the part like this. Peter ---
**Author:** ![calagan57](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/c/ce73a5/32.png) [@calagan57](https://forum.fritzing.org/u/calagan57)\ **Post date:** [July 19, 2022, 6:08pm UTC](https://forum.fritzing.org/t/create-schematic-component-problem-pinout/16599/3 "2022-07-19T18:08:53Z")
It’s Work very well (I just change number pin) Thank you very much!!! ---
**Author:** ![martinoUIA](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/m/82dd89/32.png) [@martinoUIA](https://forum.fritzing.org/u/martinoUIA)\ **Post date:** [April 29, 2023, 11:07am UTC](https://forum.fritzing.org/t/create-schematic-component-problem-pinout/16599/4 "2023-04-29T11:07:01Z")
Does anyone have a part file for AS5600 I could use for my project? ---
**Author:** ![vanepp](https://forum.fritzing.org/user_avatar/forum.fritzing.org/vanepp/32/4426_2.png) [@vanepp](https://forum.fritzing.org/u/vanepp)\ **Post date:** [April 29, 2023, 2:29pm UTC](https://forum.fritzing.org/t/create-schematic-component-problem-pinout/16599/5 "2023-04-29T14:29:49Z")
Assuming you want just the IC (as opposed to a breakout board) the generic IC referenced above is your easiest bet. If you want a breakout board we would need a web site with the breakout board specs (although a google search didn’t turn up anything but the chip itself.) Peter ---
**Author:** ![martinoUIA](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/m/82dd89/32.png) [@martinoUIA](https://forum.fritzing.org/u/martinoUIA)\ **Post date:** [April 29, 2023, 8:07pm UTC](https://forum.fritzing.org/t/create-schematic-component-problem-pinout/16599/6 "2023-04-29T20:07:13Z")
I understand, I could not find any myself either. Thanks for fast reply! ---
**Author:** ![ricardomaia](https://forum.fritzing.org/user_avatar/forum.fritzing.org/ricardomaia/32/16436_2.png) [@ricardomaia](https://forum.fritzing.org/u/ricardomaia)\ **Post date:** [July 5, 2023, 2:32pm UTC](https://forum.fritzing.org/t/create-schematic-component-problem-pinout/16599/7 "2023-07-05T14:32:46Z")
Hello @calagan57! Could you share your AS5600 component? ---
**Author:** ![Vincentl](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/v/da6949/32.png) [@Vincentl](https://forum.fritzing.org/u/Vincentl)\ **Post date:** [October 28, 2023, 1:03pm UTC](https://forum.fritzing.org/t/create-schematic-component-problem-pinout/16599/8 "2023-10-28T13:03:35Z")
Hey, can you share the actual file to import bcs I am kinda new to this software and I dont know how to fix it like you did. Would love too hear from you soon ---
**Author:** ![m1anderson](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/m/bc79bd/32.png) [@m1anderson](https://forum.fritzing.org/u/m1anderson)\ **Post date:** [February 9, 2026, 9:52pm UTC](https://forum.fritzing.org/t/create-schematic-component-problem-pinout/16599/9 "2026-02-09T21:52:48Z")
check here [AS5600 magnetic encoder](https://forum.fritzing.org/t/as5600-magnetic-encoder/21152)