# Circuit Check: Hydraulic Circuit

**URL:** <https://forum.fritzing.org/t/circuit-check-hydraulic-circuit/25036>\
**Category:** projects\
**Created:** [September 25, 2024, 10:09pm UTC](https://forum.fritzing.org/t/circuit-check-hydraulic-circuit/25036 "2024-09-25T22:09:51Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Zavala866](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/z/e79b87/32.png) [@Zavala866](https://forum.fritzing.org/u/Zavala866)\
**Post date:** [September 25, 2024, 10:09pm UTC](https://forum.fritzing.org/t/circuit-check-hydraulic-circuit/25036/1 "2024-09-25T22:09:51Z")

</div>

Hello, can someone help me confirm whether the circuit is correctly built? Can someone help me with the breadboard? I am a bit confused whether I am doing it right.  
[Hydraulic Circuit.fzz](https://forum.fritzing.org/uploads/short-url/yqyNKzhcIoHFF6fea8OqF0ZYusm.fzz) (33.4 KB)

---

<div class="post-metadata">

**Author:** ![vanepp](https://forum.fritzing.org/user_avatar/forum.fritzing.org/vanepp/32/4426_2.png) [@vanepp](https://forum.fritzing.org/u/vanepp)\
**Post date:** [September 25, 2024, 11:45pm UTC](https://forum.fritzing.org/t/circuit-check-hydraulic-circuit/25036/2 "2024-09-25T23:45:11Z")

</div>

By and large it looks fine. The w596 converter isn’t powering anything and the part has a number of errors (the ground terminals are likely connected together internally but the part isn’t configured for that and the input- is labeled input+ in breadboard.) I would move the wires like this:

 ![capture14](https://forum.fritzing.org/uploads/default/original/3X/4/6/46c8c08b347f9f3d1788a1908305b5d9e536a9fc.jpeg)

to make the layout more clear, but your way will work fine as well.  
This sketch has the breadboard changes I made.

[Hydraulic Circuit-improved.fzz](https://forum.fritzing.org/uploads/short-url/dM6MXcRVWL2uH90xifVNm03gxm4.fzz) (35.2 KB)

Peter