# BMP180 sensor part

**URL:** <https://forum.fritzing.org/t/bmp180-sensor-part/7672>\
**Category:** parts help\
**Created:** [November 10, 2019, 1:39pm UTC](https://forum.fritzing.org/t/bmp180-sensor-part/7672 "2019-11-10T13:39:22Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![mustafas](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/m/8baadc/32.png) [@mustafas](https://forum.fritzing.org/u/mustafas)\
**Post date:** [November 10, 2019, 1:39pm UTC](https://forum.fritzing.org/t/bmp180-sensor-part/7672/1 "2019-11-10T13:39:22Z")

</div>

bmp180 sensor parts ?

 ![BMP180%20Barometric%20PressureTemperature%20Altitude%20Sensor_2-1000x750](https://forum.fritzing.org/uploads/default/original/2X/7/7edebfc7a0da80fa46f0403bd4a61510479e15ff.JPG)

---

<div class="post-metadata">

**Author:** ![vanepp](https://forum.fritzing.org/user_avatar/forum.fritzing.org/vanepp/32/4426_2.png) [@vanepp](https://forum.fritzing.org/u/vanepp)\
**Post date:** [November 10, 2019, 2:31pm UTC](https://forum.fritzing.org/t/bmp180-sensor-part/7672/2 "2019-11-10T14:31:50Z")

</div>

A google search for “fritzing part bmp180” turns up a number of hits. The adafruit one is probably out, this isn’t an adafruit part but one of the others may do. If you can’t find a match post again and I’ll have a look at modifying one of the parts.

Peter