# BIGTREETECH EBB42 CAN **URL:** \ **Category:** parts help\ **Created:** [September 25, 2023, 8:53pm UTC](https://forum.fritzing.org/t/bigtreetech-ebb42-can/20639 "2023-09-25T20:53:21Z")\ **Posts on this page:** 1\ **Showing post:** 2
**Author:** ![vanepp](https://forum.fritzing.org/user_avatar/forum.fritzing.org/vanepp/32/4426_2.png) [@vanepp](https://forum.fritzing.org/u/vanepp)\ **Post date:** [September 25, 2023, 9:38pm UTC](https://forum.fritzing.org/t/bigtreetech-ebb42-can/20639/2 "2023-09-25T21:38:14Z")
There doesn’t appear to be a part for this (a google search of the form “frtizing part EBB42” will usually turn up any parts that are out there.) I’ll make one in a while (I am making another part for someone at the moment.) Making parts is not particularly easy, but is documented in these two tutorial sets (which apply to current Fritzing versions which not all tutorials out there do.) > [@Fritzing PART CREATION Video Tutorial Series](http://forum.fritzing.org/t/fritzing-part-creation-video-tutorial-series/2647): > > NEW FASTER PART MAKING VIDEOS AT THE BOTTOM-[Fritzing Parts Fast](https://forum.fritzing.org/t/fritzing-part-creation-video-tutorial-series/2647/19) ADVANCED FRITZING USER TIPS & TRICKS VIDEOS AT THE BOTTOM-[Fritzing Adv Tips & Tricks](https://forum.fritzing.org/t/fritzing-part-creation-video-tutorial-series/2647/15) A series of part creation videos - I’m not an expert, but there was nothing else around at the time. Use 1080p HD fullscreen to see details clearly - use gear symbol bottom right -. Recorded slowly for older people, so select a higher speed if it’s too slow. P.S. - Sorry about the voice/sound yum Fritzing Part Creation - Chapter1 - New Part … > [@Part creation howto part 1 breadboard and pcb](https://forum.fritzing.org/t/part-creation-howto-part-1-breadboard-and-pcb/7692): > > Someone in this forum post requested help to fix up a part. So while doing that I decided to record what I needed to do in order to fix the part to provide a tutorial to create new / fix broken parts. If you start from the Tarjeta S4A EDU.fzpz file posted in the above thread, you should be able to recreate my improved part posted in the same thread. I started by loading the original part in to Fritzing, that indicates breadboard is (at first look anyway) pretty good, but schematic and pcb are… When you run in to problems feel free to ask here and some of us will help you out. It is easiest if you upload the .fzpz file of the part you are having trouble with (or the .fzz file if it is a sketch.) Upload is the 7th icon from the left in the reply menu. Peter --- _[View the full topic](https://forum.fritzing.org/t/bigtreetech-ebb42-can/20639)._