# Attached PCB File with Cutouts - For Using & Tweaking

**URL:** <https://forum.fritzing.org/t/attached-pcb-file-with-cutouts-for-using-tweaking/7575>\
**Category:** Tutorials - Guides - How to's - & Experiences.\
**Created:** [October 27, 2019, 10:21pm UTC](https://forum.fritzing.org/t/attached-pcb-file-with-cutouts-for-using-tweaking/7575 "2019-10-27T22:21:32Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![opera\_night](https://forum.fritzing.org/user_avatar/forum.fritzing.org/opera_night/32/3724_2.png) [@opera\_night](https://forum.fritzing.org/u/opera_night)\
**Post date:** [October 27, 2019, 10:21pm UTC](https://forum.fritzing.org/t/attached-pcb-file-with-cutouts-for-using-tweaking/7575/1 "2019-10-27T22:21:33Z")

</div>

I made the attached PCB File for those wanting Cutouts on the PCB for whatever reasons (including features for Parts) and Not wanting to fuss around, learning, installing software… )

It’s pretty simple:

**Example:**

1. Know (approx) what PCB dimensions you want.
2. Start a New Fritzing Sketch.
3. Click the PCB and Load the PCB\_4\_Cutouts.SVG from the Inspector Panel.
4. Resize the PCB as needed to your required dimensions (don’t worry about the existing cutout - you’ll tweak).
5. Add your design/parts/etc. Layout as close to final as possible.
6. Edit the PCB\_4\_Cutouts.SVG in your favorite Graphics Program. Move, Re-Size, Copy and Paste existing Cutouts or Add/create new ones as needed…
7. Export/Save the file.
8. Reload it into Fritzing and confirm all is well.

- Done \* Your Exported Gerbers should be good for Laser cutting and Milling the board’s Contour with Cutouts.

**Files:**  
Fritzing: [PCB\_4\_Cutouts\_example.fzz](https://forum.fritzing.org/uploads/default/original/2X/a/a80171a74ba6e1559636d3afafad0eb44b844add.fzz) (2.4 KB)  
PCB\_4\_Cutouts.SVG (delete the .fzp) [PCB\_4\_Cutouts.svg.fzp](https://forum.fritzing.org/uploads/default/original/2X/5/57286599af795ff30423691a38135aadadb5228b.svg) (1.5 KB)

The file PCB\_4\_Cutouts.SVG has:  
Two Rectangles and One Bezigon Line Shaped cutouts.  
A Silkscreen layer with Board Shape (offset) and One Rectangle around a cutout for the Silkscreen.

Tweak as needed/indicated above…

**Results - Images below:**  
Fritzing Sketch with example and Milled simulation (CopperCam)  
Gerbers of Board Contour and Btm Copper Layer

NOTE: I did not Horizontally flip the board for milling - would normally do that but was lazy for this post.

 ![52%20PM](https://forum.fritzing.org/uploads/default/original/2X/b/bfd28a205a68ef2280a6551a4031cb6b1f100bb0.jpg)

 ![43%20PM](https://forum.fritzing.org/uploads/default/original/2X/c/c47d6eff7decfdd735f99bb21452cb4771c81c68.png)

---

<div class="post-metadata">

**Author:** ![MorganLeij](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/m/ee59a6/32.png) [@MorganLeij](https://forum.fritzing.org/u/MorganLeij)\
**Post date:** [April 24, 2020, 3:38pm UTC](https://forum.fritzing.org/t/attached-pcb-file-with-cutouts-for-using-tweaking/7575/2 "2020-04-24T15:38:54Z")

</div>

Thank you for sharing the knowledge 👍
