# AS608指纹模块\_AS608 Fingerprint scanning module

**URL:** <https://forum.fritzing.org/t/as608-as608-fingerprint-scanning-module/23004>\
**Category:** uncategorized\
**Created:** [April 1, 2024, 8:33am UTC](https://forum.fritzing.org/t/as608-as608-fingerprint-scanning-module/23004 "2024-04-01T08:33:18Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![vanepp](https://forum.fritzing.org/user_avatar/forum.fritzing.org/vanepp/32/4426_2.png) [@vanepp](https://forum.fritzing.org/u/vanepp)\
**Post date:** [April 1, 2024, 2:40pm UTC](https://forum.fritzing.org/t/as608-as608-fingerprint-scanning-module/23004/2 "2024-04-01T14:40:22Z")

</div>

Your part has a number of problems. Breadboard doesn’t align correctly to the grid because the connector pin is a line (not a circle or square and doesn’t have a teminalId) and so aligns to the center of the pin not one end or the other as it should.

 ![capture](https://forum.fritzing.org/uploads/default/original/3X/e/d/ed50fc472a131d53a2f4930e9912f9a5d00ad794.jpeg)

schematic has the connectors defined incorrectly and thus doesn’t work

 ![capture1](https://forum.fritzing.org/uploads/default/original/3X/9/8/98564e667cd200b4da20828c3b28c664715d206c.jpeg)

(the red rectangle indicates connector errors) it is also still labeled as the MAX device it was cloned from.

pcb has a similar problem (the connectors are not correctly defined.

 ![capture2](https://forum.fritzing.org/uploads/default/original/3X/9/5/95502ffed46fdd99610cfb2b62fecf46fa3ea54f.jpeg)

FritzingCheckPart.py has a number of further complaints:

Error 69: File  
‘svg.breadboard.Fingerprint module\_5006e3f405400ad22038bbf10bdccfcf\_8\_breadboard.svg.bak’  
At line 8

Found a drawing element before a layerId (or no layerId)

Error 18: File  
‘part.Fingerprint module\_5006e3f405400ad22038bbf10bdccfcf\_8.fzp.bak’

Connector connector1pin is in the fzp file but not the svg file. (typo?)

svg svg.schematic.Fingerprint module\_5006e3f405400ad22038bbf10bdccfcf\_8\_schematic.svg.bak

Error 18: File  
‘part.Fingerprint module\_5006e3f405400ad22038bbf10bdccfcf\_8.fzp.bak’

Connector connector2pin is in the fzp file but not the svg file. (typo?)

svg svg.schematic.Fingerprint module\_5006e3f405400ad22038bbf10bdccfcf\_8\_schematic.svg.bak

Error 18: File  
‘part.Fingerprint module\_5006e3f405400ad22038bbf10bdccfcf\_8.fzp.bak’

Connector connector3pin is in the fzp file but not the svg file. (typo?)

svg svg.schematic.Fingerprint module\_5006e3f405400ad22038bbf10bdccfcf\_8\_schematic.svg.bak

Error 18: File  
‘part.Fingerprint module\_5006e3f405400ad22038bbf10bdccfcf\_8.fzp.bak’

Connector connector4pin is in the fzp file but not the svg file. (typo?)

svg svg.schematic.Fingerprint module\_5006e3f405400ad22038bbf10bdccfcf\_8\_schematic.svg.bak

Error 18: File  
‘part.Fingerprint module\_5006e3f405400ad22038bbf10bdccfcf\_8.fzp.bak’

Connector connector5pin is in the fzp file but not the svg file. (typo?)

svg svg.schematic.Fingerprint module\_5006e3f405400ad22038bbf10bdccfcf\_8\_schematic.svg.bak

Error 18: File  
‘part.Fingerprint module\_5006e3f405400ad22038bbf10bdccfcf\_8.fzp.bak’

Connector connector6pin is in the fzp file but not the svg file. (typo?)

svg svg.schematic.Fingerprint module\_5006e3f405400ad22038bbf10bdccfcf\_8\_schematic.svg.bak

Error 18: File  
‘part.Fingerprint module\_5006e3f405400ad22038bbf10bdccfcf\_8.fzp.bak’

Connector connector7pin is in the fzp file but not the svg file. (typo?)

svg svg.schematic.Fingerprint module\_5006e3f405400ad22038bbf10bdccfcf\_8\_schematic.svg.bak

Error 69: File  
‘svg.pcb.Fingerprint module\_5006e3f405400ad22038bbf10bdccfcf\_8\_pcb.svg.bak’  
At line 751

Found a drawing element before a layerId (or no layerId)

Error 17: File  
‘part.Fingerprint module\_5006e3f405400ad22038bbf10bdccfcf\_8.fzp.bak’

No connectors found for view pcbView.

This tutorial will tell you how to fix the various problems if you chose (and how to use FritzingCheckPart.py to check if the part is correct.)

> [@Part creation howto part 1 breadboard and pcb](https://forum.fritzing.org/t/part-creation-howto-part-1-breadboard-and-pcb/7692):
>
> Someone in this forum post [http://forum.fritzing.org/t/tarjeta-s4a-edu-pieza-en-proceso-solamente-falta-la-imagen-en-pcb-y-en-esquematico/7487](http://forum.fritzing.org/t/tarjeta-s4a-edu-pieza-en-proceso-solamente-falta-la-imagen-en-pcb-y-en-esquematico/7487) requested help to fix up a part. So while doing that I decided to record what I needed to do in order to fix the part to provide a tutorial to create new / fix broken parts. If you start from the Tarjeta S4A EDU.fzpz file posted in the above thread, you should be able to recreate my improved part posted in the same thread. I started by loading the origi…

Peter

---

_[View the full topic](https://forum.fritzing.org/t/as608-as608-fingerprint-scanning-module/23004)._