# Arduino UNO Q Fritzing part **URL:** \ **Category:** parts submit\ **Created:** [October 27, 2026, 2:13am UTC](https://forum.fritzing.org/t/arduino-uno-q-fritzing-part/34709 "2026-10-27T02:13:10Z")\ **Posts on this page:** 1\ **Page:** 1
**Author:** ![DIYables](https://forum.fritzing.org/user_avatar/forum.fritzing.org/diyables/32/28321_2.png) [@DIYables](https://forum.fritzing.org/u/DIYables)\ **Post date:** [October 27, 2026, 2:13am UTC](https://forum.fritzing.org/t/arduino-uno-q-fritzing-part/34709/1 "2026-10-27T02:13:10Z")
Hello, We would like to share a Fritzing part for the **Arduino UNO Q**. We could not find one, so we made it for our tutorials and want to share it with everyone. Please note: this is a community part made by [newbiely.com](http://newbiely.com). It is **not an official Arduino part**. ![Arduino-UNO-Q](https://forum.fritzing.org/uploads/default/original/3X/4/b/4bda70dfc57effc03410b486f8d972b6fb84e0d4.png) ![Arduino-UNO-Q-wiring-example](https://forum.fritzing.org/uploads/default/original/3X/e/b/ebb038e94d6bbddfd5938c83cd84be39fe9efc26.png) **Download:** [Arduino-UNO-Q.fzpz](https://diyables.io/download/fritzing/Arduino-UNO-Q.fzpz) Import it into Fritzing (File \> Open, or right-click a parts bin \> Import). **About the part** - Breadboard view: the UNO Q board with the Qualcomm QRB2210 and STM32 chips, USB-C, the 13 x 8 LED matrix, ICSP and Qwiic connectors. - Pins: the Uno headers (D0-D13, A0-A5, IOREF, RESET, 3.3V, 5V, GND, VIN, AREF, SDA, SCL), ICSP (6 pins) and Qwiic (4 pins). GND, 3.3V, 5V and RESET are bused. - Legs and holes are grey, schematic pins are 100 mil long on the 100 mil grid. - It uses the same frame and connector IDs as the Arduino UNO R4 WiFi part, so a sketch made with the R4 part can move to this part by changing only the part. Tutorials for the Arduino UNO Q: [https://newbiely.com/uno-q](https://newbiely.com/uno-q) Feedback is welcome. If you see something wrong, please tell us and we will fix it.