# Arducam Multi Camera Adapter Module?

**URL:** <https://forum.fritzing.org/t/arducam-multi-camera-adapter-module/16967>\
**Category:** parts help\
**Created:** [September 18, 2022, 4:31pm UTC](https://forum.fritzing.org/t/arducam-multi-camera-adapter-module/16967 "2022-09-18T16:31:23Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![beebeebee](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/b/f19dbf/32.png) [@beebeebee](https://forum.fritzing.org/u/beebeebee)\
**Post date:** [September 18, 2022, 4:31pm UTC](https://forum.fritzing.org/t/arducam-multi-camera-adapter-module/16967/1 "2022-09-18T16:31:23Z")

</div>

Hi! I’m new here and I love this app already!! I was wondering if any one has a part file for Arducam Multi Camera Adapter Module V2.2?

---

<div class="post-metadata">

**Author:** ![vanepp](https://forum.fritzing.org/user_avatar/forum.fritzing.org/vanepp/32/4426_2.png) [@vanepp](https://forum.fritzing.org/u/vanepp)\
**Post date:** [September 18, 2022, 7:25pm UTC](https://forum.fritzing.org/t/arducam-multi-camera-adapter-module/16967/2 "2022-09-18T19:25:09Z")

</div>

> [@How to Find Pi Camera v2 module](https://forum.fritzing.org/t/how-to-find-pi-camera-v2-module/11520):
>
> How to download pi camera v2 like that on fritzing?

Peter

---

<div class="post-metadata">

**Author:** ![beebeebee](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/b/f19dbf/32.png) [@beebeebee](https://forum.fritzing.org/u/beebeebee)\
**Post date:** [September 18, 2022, 10:02pm UTC](https://forum.fritzing.org/t/arducam-multi-camera-adapter-module/16967/3 "2022-09-18T22:02:19Z")

</div>

Looking for the adapter for the cameras, not the cameras itself! sorry for the confusion

 ![b0120-arducam_multi-camera-adapter_01_1-600x600](https://forum.fritzing.org/uploads/default/original/2X/9/90488a0a2201c5eadc22f521cfda83af84e9c790.jpeg)

---

<div class="post-metadata">

**Author:** ![vanepp](https://forum.fritzing.org/user_avatar/forum.fritzing.org/vanepp/32/4426_2.png) [@vanepp](https://forum.fritzing.org/u/vanepp)\
**Post date:** [September 19, 2022, 12:11am UTC](https://forum.fritzing.org/t/arducam-multi-camera-adapter-module/16967/4 "2022-09-19T00:11:53Z")

</div>

While such a part could be made, I’m not sure I see the use for it. The GPIO pins are the only ones that will connect to anything as the camera connectors aren’t populated on any of the PI cpu boards in Fritzing. As well there is little documentation (and what there is is unclear) for the board.

> **[B0120.pdf](https://www.uctronics.com/download/Amazon/B0120.pdf)**
>
> 808.15 KB

appears to say that only GPIOs 7, 11, and 12 are used, but the diagram above it indicates a lot more pins (but no power or grounds) connected. So unless there is better documentation somewhere I expect a Fritzing part is unlikely.

Peter

---

<div class="post-metadata">

**Author:** ![vanepp](https://forum.fritzing.org/user_avatar/forum.fritzing.org/vanepp/32/4426_2.png) [@vanepp](https://forum.fritzing.org/u/vanepp)\
**Post date:** [September 20, 2022, 4:48am UTC](https://forum.fritzing.org/t/arducam-multi-camera-adapter-module/16967/5 "2022-09-20T04:48:20Z")

</div>

While I don’t think this is likely to be useful, it should do what you want.

[Arducam\_Multi\_Camera\_Adapter\_Module.fzpz](https://forum.fritzing.org/uploads/short-url/thQbcoJhQYyw8ROeFP3IWTi0f7B.fzpz) (20.7 KB)

Peter

---

<div class="post-metadata">

**Author:** ![beebeebee](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/b/f19dbf/32.png) [@beebeebee](https://forum.fritzing.org/u/beebeebee)\
**Post date:** [September 22, 2022, 1:14am UTC](https://forum.fritzing.org/t/arducam-multi-camera-adapter-module/16967/6 "2022-09-22T01:14:48Z")

</div>

Thank you so much! I just need the breadboard view for now so this should work! Thanks again