# About the parts-submit category **URL:** \ **Category:** parts submit\ **Created:** [May 3, 2025, 3:57pm UTC](https://forum.fritzing.org/t/about-the-parts-submit-category/28475 "2025-05-03T15:57:49Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![RAPTOR7762](https://forum.fritzing.org/user_avatar/forum.fritzing.org/raptor7762/32/22620_2.png) [@RAPTOR7762](https://forum.fritzing.org/u/RAPTOR7762)\ **Post date:** [May 3, 2025, 3:57pm UTC](https://forum.fritzing.org/t/about-the-parts-submit-category/28475/1 "2025-05-03T15:57:49Z")
share your custom made parts. Attach the .fzpz file and the datasheet/website. Before making Fritzing parts please see > [@A new part creation HowTo (long! So long it is in 2 posts)](https://forum.fritzing.org/t/a-new-part-creation-howto-long-so-long-it-is-in-2-posts/2238): > > (Edit: November 2016: This is an updated (and corrected) version of the original parts creation howto. This version corrects some suggestions (mostly saving Inkscape files as optimized svg which turns out to cause other problems) with the first version and expands the section on parts testing. While there doesn’t appear to be a lot of interest in this subject I’ll make at least this update so the information is as correct as I can get it.) This is a description of how I made the Valor PM6078-00… > [@Part creation howto part 1 breadboard and pcb](https://forum.fritzing.org/t/part-creation-howto-part-1-breadboard-and-pcb/7692): > > Someone in this forum post requested help to fix up a part. So while doing that I decided to record what I needed to do in order to fix the part to provide a tutorial to create new / fix broken parts. If you start from the Tarjeta S4A EDU.fzpz file posted in the above thread, you should be able to recreate my improved part posted in the same thread. I started by loading the original part in to Fritzing, that indicates breadboard is (at first look anyway) pretty good, but schematic and pcb are… Generic IC > [@Part creation howto part13-ICs](https://forum.fritzing.org/t/part-creation-howto-part13-ics/27093): > > This is a continuation of As I lately decided to merge this tutorial with Peter’s part creation series, I left the links behind. Never mind, I’ll just leave them there as a reminder. In this tutorial, you are going to learn how to make Fritzing Parts. You need these apps ready: 1. Fritzing (of course) Download Fritzing here: [https://fritzing.org/download/](https://fritzing.org/download/) Alternative payment method (without using PayPal): [https://fritzing.org/download?payment\_method=alt](https://fritzing.org/download?payment_method=alt) 2. Inkscape Download Inkscape h… Parts editor > [@Part Creation Tutorial -- With New Part Editor -- Easy (maybe), simple and fast!](https://forum.fritzing.org/t/part-creation-tutorial-with-new-part-editor-easy-maybe-simple-and-fast/28309): > > Someone requested for a part here So while I was making the part, I decided to record down what I did. Download these (if you have not done so) [Fritzing](https://fritzing.org/download?payment_method=alt) ([paypal](https://fritzing.org/download)) Inkscape The Schematic Extension for Inkscape First download this image and upload it into Inkscape Next, download this SVG of connectors [438c5a7d06085bfd7afabec3c8a241fc3d2a0a28] Line it on the image and rescale the image (SVG image below with PNG at the back) [001] Then, design… > [@Fritzing PART CREATION Video Tutorial Series](https://forum.fritzing.org/t/fritzing-part-creation-video-tutorial-series/2647): > > NEW FASTER PART MAKING VIDEOS AT THE BOTTOM-[Fritzing Parts Fast](https://forum.fritzing.org/t/fritzing-part-creation-video-tutorial-series/2647/19) ADVANCED FRITZING USER TIPS & TRICKS VIDEOS AT THE BOTTOM-[Fritzing Adv Tips & Tricks](https://forum.fritzing.org/t/fritzing-part-creation-video-tutorial-series/2647/15) A series of part creation videos - I’m not an expert, but there was nothing else around at the time. Use 1080p HD fullscreen to see details clearly - use gear symbol bottom right -. Recorded slowly for older people, so select a higher speed if it’s too slow. P.S. - Sorry about the voice/sound yum Fritzing Part Creation - Chapter1 - New Part … For old\_grey’s one please search on YouTube for the video ---
**Author:** ![landracer](https://forum.fritzing.org/user_avatar/forum.fritzing.org/landracer/32/3806_2.png) [@landracer](https://forum.fritzing.org/u/landracer)\ **Post date:** [May 3, 2025, 3:59pm UTC](https://forum.fritzing.org/t/about-the-parts-submit-category/28475/2 "2025-05-03T15:59:39Z")
---
**Author:** ![landracer](https://forum.fritzing.org/user_avatar/forum.fritzing.org/landracer/32/3806_2.png) [@landracer](https://forum.fritzing.org/u/landracer)\ **Post date:** [May 3, 2025, 4:01pm UTC](https://forum.fritzing.org/t/about-the-parts-submit-category/28475/4 "2025-05-03T16:01:21Z")
Topic closed, please create a fresh post for every new part you want listed in fritzing. Thank you everyone, we appreciate you!