# A01ANYUB ultrasonic sensor

**URL:** <https://forum.fritzing.org/t/a01anyub-ultrasonic-sensor/27848>\
**Category:** parts help\
**Created:** [March 27, 2025, 1:09pm UTC](https://forum.fritzing.org/t/a01anyub-ultrasonic-sensor/27848 "2025-03-27T13:09:39Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![FadhliRabbi](https://forum.fritzing.org/user_avatar/forum.fritzing.org/fadhlirabbi/32/23402_2.png) [@FadhliRabbi](https://forum.fritzing.org/u/FadhliRabbi)\
**Post date:** [March 27, 2025, 1:09pm UTC](https://forum.fritzing.org/t/a01anyub-ultrasonic-sensor/27848/1 "2025-03-27T13:09:39Z")

</div>

A01ANYUB

 ![WhatsApp Image 2025-03-27 at 20.02.49_18fe2aca](https://forum.fritzing.org/uploads/default/original/3X/7/e/7e2a4a7858158f7676b936f4215cfbe20b5312c7.jpeg)

i search this module. any of you have this part design ?

---

<div class="post-metadata">

**Author:** ![RAPTOR7762](https://forum.fritzing.org/user_avatar/forum.fritzing.org/raptor7762/32/22620_2.png) [@RAPTOR7762](https://forum.fritzing.org/u/RAPTOR7762)\
**Post date:** [March 27, 2025, 2:54pm UTC](https://forum.fritzing.org/t/a01anyub-ultrasonic-sensor/27848/2 "2025-03-27T14:54:59Z")

</div>

> [@FadhliRabbi](#):
>
> i search this module. any of you have this part design ?

images are basically useless. As the template (which you deleted) suggests, we need the website where the part was purchased from/official datasheet. It **must** contain

1. Connector names
2. Dimensions (inches or mm)

---

<div class="post-metadata">

**Author:** ![RAPTOR7762](https://forum.fritzing.org/user_avatar/forum.fritzing.org/raptor7762/32/22620_2.png) [@RAPTOR7762](https://forum.fritzing.org/u/RAPTOR7762)\
**Post date:** [March 27, 2025, 3:10pm UTC](https://forum.fritzing.org/t/a01anyub-ultrasonic-sensor/27848/3 "2025-03-27T15:10:04Z")

</div>

Otherwise, the HC-SR04 ultrasonic sensor in fritzing should do what you want

[HC-SR04 Ultrasonic Distance Sensor.fzpz](https://forum.fritzing.org/uploads/short-url/mpACoiyedmSOq1TK53Pyo2ow6Se.fzpz) (44.0 KB)

---

<div class="post-metadata">

**Author:** ![FadhliRabbi](https://forum.fritzing.org/user_avatar/forum.fritzing.org/fadhlirabbi/32/23402_2.png) [@FadhliRabbi](https://forum.fritzing.org/u/FadhliRabbi)\
**Post date:** [March 27, 2025, 4:17pm UTC](https://forum.fritzing.org/t/a01anyub-ultrasonic-sensor/27848/4 "2025-03-27T16:17:05Z")

</div>

this is a a part from dfrobot sesor

> **[A01NYUB Waterproof Ultrasonic Sensor Wiki - DFRobot](https://wiki.dfrobot.com/A01NYUB%20Waterproof%20Ultrasonic%20Sensor%20SKU_SEN0313#target_1)**
>
> Wiki: This A01NYUB Waterproof Ultrasonic Sensor features farther monitoring distance, wider detection range and a certain penetration power(smog, dust). Use the sensor with Arduino controller to build up your projects, such as backing car...

follow this link, i hope u get it, thank u

---

<div class="post-metadata">

**Author:** ![vanepp](https://forum.fritzing.org/user_avatar/forum.fritzing.org/vanepp/32/4426_2.png) [@vanepp](https://forum.fritzing.org/u/vanepp)\
**Post date:** [March 29, 2025, 4:37pm UTC](https://forum.fritzing.org/t/a01anyub-ultrasonic-sensor/27848/5 "2025-03-29T16:37:03Z")

</div>

This part should do what you want.

[dfr-sen0313.fzpz](https://forum.fritzing.org/uploads/short-url/lwPnkq2MMAYUCCRS7RAxDtZMYRP.fzpz) (4.9 KB)

Peter