# 100w 10a step up booster part

**URL:** <https://forum.fritzing.org/t/100w-10a-step-up-booster-part/12791>\
**Category:** parts submit\
**Created:** [May 1, 2021, 7:44am UTC](https://forum.fritzing.org/t/100w-10a-step-up-booster-part/12791 "2021-05-01T07:44:15Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![yavuz\_kagan](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/y/dc4da7/32.png) [@yavuz\_kagan](https://forum.fritzing.org/u/yavuz_kagan)\
**Post date:** [May 1, 2021, 7:44am UTC](https://forum.fritzing.org/t/100w-10a-step-up-booster-part/12791/1 "2021-05-01T07:44:15Z")

</div>

[100W 10A POWER BOOSTER STEP UP VOLTAJ YÜKSELTİCİ.fzpz](https://forum.fritzing.org/uploads/short-url/v86c1nkJHgpoONKu33xGwQ50Je8.fzpz) (13.7 KB)  
There is some error but I think it is not very important.

---

<div class="post-metadata">

**Author:** ![vanepp](https://forum.fritzing.org/user_avatar/forum.fritzing.org/vanepp/32/4426_2.png) [@vanepp](https://forum.fritzing.org/u/vanepp)\
**Post date:** [May 1, 2021, 2:53pm UTC](https://forum.fritzing.org/t/100w-10a-step-up-booster-part/12791/2 "2021-05-01T14:53:17Z")

</div>

A few problems, starting with a Fritzing bug in Windows which means Windows won’t load the file name above, so I shortened the name to fix that.

Breadboard:

Has no layerId and thus won’t export as an svg.  
The pot has connectors which it shouldn’t so replace it with a pot that doesn’t have connectors. Group the result and add a layerId of breadboard.

Schematic

created a schematic from the schematic template here:

> [@Schematic svg template howto](https://forum.fritzing.org/t/schematic-svg-template-howto/7583):
>
> This is a Fritzing schematic template file for use when you want to make a schematic svg from scratch (which I usually do as I find it easiest). It is set to the proper scale as explained in this howto and the fonts, font sizes and colors match those called for in the graphics standards here: [http://fritzing.org/fritzings-graphic-standards/](http://fritzing.org/fritzings-graphic-standards/) This simple one has connectors with terminalIds and labels on all 4 sides of the rectangle with the text-anchor set to the value appropate for the posit…

fzp file

Change family to POWER Booster from power to make it unique to avoid this:

 ![capture](https://forum.fritzing.org/uploads/default/original/2X/a/a21fb75d864c0b093dd15a97524b51dcc76f9bbc.jpeg)

note the pull down menu on variant. If I select the V1 variant I get a completely different part (because the family is the same) which isn’t correct.

 ![capture1](https://forum.fritzing.org/uploads/default/original/2X/f/f233867e7ebbca8780b753187e19d4963ce26d26.jpeg)

Suppress pcb view (instructions here)

> [@Part-creation-howto-part7-suppress-pcb-layer-howto](https://forum.fritzing.org/t/part-creation-howto-part7-suppress-pcb-layer-howto/7918):
>
> this is a continuation of the family and variant howto here: This howto details the various ways to suppress the pcb layer in a part. As with the earlier parts of this series I will use the yahboom super-bit part as the example. Because there is a 18650 battery (and a BBC micro:bit plugged in vertically to a socket on the super:bit) it isn’t practical to place a pcb on top of the super:bit. Rather than do the work (there are 86 connectors!) required to make pcb view work, I chose to suppress …

renumbered the connectors and removed the unused ones (which is what was causing the red squares)

added a bus for the two ground pins. All of that results in this part

[100W 10A POWER BOOSTER STEP UP VOLTA.fzpz](https://forum.fritzing.org/uploads/short-url/cjJfqH2XloFtS2LzzuT5n8ZqhNE.fzpz) (7.8 KB)

which works properly.

Peter
